Archive for January, 2011

GEMS thick liquid chip type flow switch FS-550

Brand: Gems – the intersection of Jem and person

Name: GEMS thick liquid chip type flow switch FS-550

Type: FS-550

About products:

Item Model FS-550 series flow switch- High pressure, metal oar slice Sector application Vessel, HVAC, water treatment

The products are detailed:

Name of product

American Gems Company FS-550 series flow switch- High pressure, metal oar slice

Item Model

FS-550 series flow switch- High pressure, metal oar slice

Sector application

Vessel, HVAC, water treatment

Characteristic of the products

Pipeline size: 1-1/4 of the ” and the above
Main frame material: Stainless steel or brass
Set up the type: Fixed type

Download of related data

Every parameter

Connect the part of the liquid

Outer cover

Brass or 316 stainless steel

Oar slice

302 stainless steel

Spring

316 stainless steel

The others connect the part of the liquid

Pottery and teflon

Performance parameter

The set point precision

± 25%

Switch

SPDT,20VA

Repeatability

± 5%

Pressure drop

3PSIG Max.

Environmental parameter

Maximum working pressure

2000PSIG

Operating temperature

-30℉ – +300℉ (- 34.4 ℃- +148.9 ℃)

Physical parameter

Electrically connected

No.18AWG, 24 ” is long, the lead wire of polymer

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

Electronic wear-resisting powder butterfly valve, cement butterfly valve, the dust butterfly valve leaves

Brand: AAEON – grind and raise

Name: Electronic wear-resisting powder butterfly valve, cement butterfly valve, the dust butterfly valve leaves

Type: kw1f

About products:

Used for closing the feed box, the hopper and silo equipped with mealy or granular supplies. KW1F butterfly valve is that the whole world employs one of the most extensive apparatuses.

The products are detailed:

The health is applying KW2F electronic powder butterfly valve dealt with to the mealy and granular supplies of production, powder butterfly’s valve, electronic dust butterfly valve, has had in range of China application already, the butterfly valve is made up of half a valve body that the cast of two pieces of high pressure has been press-casted, half a valve body is a aluminium alloy material, the rotation valve disc, in order to get the volume recombination material together, whether or casting iron and receiving the artificial rubber seal of the stress in advance. There is a series of valve that has stainless steel valve discs and intact seals authorized through FDA, this kind of valve is suitable for the food being industrial. KW1F has a crest flange and a hem part, are suitable for connecting a flexible clutch. KW2F crests and bottoms are the identical round flange.

Function

Used for closing the feed box, the hopper and silo equipped with mealy or granular supplies. KW1F butterfly valve is that the whole world employs one of the most extensive apparatuses.
The purpose made valve in order to used in the special occasion in the past, the already from the health in order to change to produce in enormous quantities industrial products now, and they have extremely general characteristics.
KW1F butterfly valve can be applied to the treatment of all mealy and granular supplies, the valve is dammed and transmitted the dry supplies pneumatically with one’s own gravity of the supplies. Can install in the hopper, feed box, the silo, below of spiral or other typological conveyers, and connect the pneumatic delivery duct. Because of the special construction of this valve and application of engineering material, it is a very economic and extremely efficient choice all the time.

Characteristic – characteristic – benefit

KW1F valve, there are flange of crest and hem part, are suitable for connecting the flexible clutch
KW2F valve, the crests and bottoms are the identical flange
Maximum can bear pressure 0.2bar (2.9PSI)
Half a valve body that the cast of the high pressure press-casts, half a valve body is a aluminium alloy material
The valve disc material is the carbon steel, polymer of project, stainless steel
Standard grade and seal of grade of food
There are few assemblies
Light weight is easy to carry
Removable valve disc
Highly able to bear corrosion
It is simple and convenient to assemble
Safeguard fast
I do not stay after transmitting the supplies

Electric drive summary

This product is to turn the valve electric drive of the shape round, can realize turning on, closes and the control of the intermediate position through the switch connecting. The regulating type valve electric drive of the proportion of production of our company, realize the automatic regulation of the valve opening.

1.The function is powerful: Intelligent, proportion expression, open system are fill with everything
2.The volume is small and exquisite: The volume is only equivalent to 35% of the like product Left and right sides
3.Light and pleasant: The weight is only equivalent to 30% of the like product Left and right sides
4.Reliable performance: Bearing and electric element adopt imported leading brand products
5.Elegant appearance: The aluminum alloy press-casts the outer cover, meticulous and smooth
6.Gao Qiang is wear-resisting: It is good that the special copper alloy forges the worm gear, high, wearability of intensity
7.Safety assurance: 1500V withstand voltage, the purpose-built line locks the cabinet conductor
8.It is simple to form a complete set: It is very simple to adopt the single-phase power, connect the circuit
9.Easy to use: Avoid cheering on and avoiding handing over item by item, waterproof rustproof, arbitrary angle and installing 10. Protective device: Location of double limit, overheat protective, overload protection
11.Many kinds of speeds: The whole 5~150 second such as journey time, the intersection of foot and different requirement of working condition
12.Expert electric wire: Use the heat-resisting Fire-resistant Wire, is heated not to wear out, safe and reliable
13.Antiseptic and rustproof: The support, coupling joint, screw adopt the stainless steel
14.Intellectual numerical control: Built-in module adopt advanced the intersection of computer and one piece and intellectual control software, receive computer or standard control signal that industrial instruments export directly ‘ 4-20mADC/1-5VDC signal,etc.) Realize the electronic valve opening ‘ Intellectual control and accurate positioning) of displacement

Model

1 general type ( The switch is put in place)
2 switches of contact image output type
3 opening signal feedbacking types, feedback the potentiometer 1KΩ
4 opening signals feedback and contact image output type
5 built-in the intelligent object ‘ Regulating type) Input: 4-20MA/1 5VCD standard signal
Export: 4-20MA/1 5VDC standard signal

Tags: , , ,

Monday, January 31st, 2011 Power & control products No Comments

High-pressure air blower, high-pressure air blower, the air blower of Taiwan, the air blower of Taiwan

Brand: The whole wind

Name: High-pressure air blower, high-pressure air blower, the air blower of Taiwan, the air blower of Taiwan, the high-pressure air blower of Taiwan

Type: RB-1515

About products:

High-pressure air blower, high-pressure air blower, the air blower of Taiwan, the air blower of Taiwan, the high-pressure air blower of Taiwan, the original packaging air blower of Taiwan, the air blower of Taiwan, quality is guaranteed, inquiries are welcome

The products are detailed:

The speciality of our company is devoted to industrial reducing energy consumption, system transforming, industry’s automated system of vacuum pressure to transform, the industrial automation is transmitted ‘ Pneumatically) Several years research and develop and transform the experience to improve, and the speciality offers the swirl type air blower (annular high-pressure air blower) of the whole wind . The whole wind high-pressure air blower improves unique performance projection through our company, become high swirl type high-pressure air blower of double section up to 150KP of first pressure in China.
The high-pressure air blower of the whole wind, introduces global and leading Japanese science and technology and preparation method of German Siemens, the company passes ISO9001: 2008 international quality systems are authorized, the air blower is authorized through European Union CE, sell well all over the world!
The high-pressure air blower of the whole wind is the advanced products in Chinese air blower trade, the characteristic is higher than the similar products, the high-pressure air blower of the whole wind adopts the special material to make and become:
The blade, wind of the high-pressure air blower of a wind cover and is made of H most hard ADC12 material in the world, it is equivalent to the equal material of steel rim of wheel of Benz.
The bearing of the high-pressure air blower of second, the whole wind adopts the high-speed, high temperature resistant imported bearing, 2800 rpms in case of 50Hz, 3450 rpms in case of 60Hz, avoid lubricating, non-maintaining in 150000 hours, operate for 17 years continuously in other words.
Third, the whole wind wind gap of coming in and going out of high-pressure air blower fits the built-in sound-absorptive tube, thus it is with low noise to reach.
Fourth, type can total pressure use under the the whole the intersection of wind and high-pressure the intersection of air blower and 1.1KW.
Fifth, the whole wind high-pressure air blower is steady in pressure, handling the embodiment and employing through water treatment, electric plating proves, even mixed, it is highly unanimous that the ripples roll.
Sixth, the whole wind high-pressure air blower, at equal power, equal pressure, the flowrate is greater than the like product.
Seventh, the whole wind high-pressure air blower wind overlays and adopts the slice to distribute thermal design, it is equivalent to a motorcycle engine heat dissipating double-fuselage, have reduced the temperature of the runtime of the air blower greatly.
Eighth, the whole wind high-pressure air blower adopts the leading design concept of the bearing, two bearings locate in the blade forward end of the air blower and rear end of the motor, reach the preferably running balancing disposition, and do benefit to dispelling the heat.
(In that: The forward end of the blade has air-cooling fins that dispels the heat, and the bearing of the rear end works under the cooling-down fan attached of the air blower, thus keep the bearing making the long term operation at low temperature. )
Ninth, the whole the intersection of wind and high-pressure air blower adopt, resist shock while being special foot base design, low the intersection of air blower and vibrations that produce run, greatly.
Economic energy-conservation of high-pressure air blower of tenth, the whole wind. Under equal power, equal pressure, equal flowrate, the electric current of the high-pressure air blower of the whole wind is less than other similar products. The high-pressure air blower of the whole wind is applied to all trades and professions extensively, for example: The high-pressure air blower of specialized complete wind of the filling equipment, the high-pressure air blower of specialized complete wind of sewage disposal, the specialized air blower of oxygenation of aquaculture, oxygenation pump, the high-pressure air blower of specialized complete wind of the electroplating device, the specialized high-pressure air blower of the apparatus of hot spring, the high-pressure air blower of specialized complete wind of the textile apparatus, the high-pressure air blower of specialized complete wind of dentist’s apparatus, the high-pressure air blower of specialized complete wind of the printer, the specialized complete Fructus Averrhoae Carambolae air blower of the woodworking machinery, high-pressure exhaust fan, high-pressure ventilating blower, cool and force the ventilating blower, the high-pressure ventilator draught fan, suck the specialized swirl type high-pressure air blower of the material machine, the specialized high-pressure air blower of vacuum pump aquaculture of angry concentric type, the specialized high-pressure air blower of sewage disposal, the specialized high-pressure air blower of the filling equipment, the specialized high-pressure air blower of the electroplating device, specialized high-pressure air blower of the apparatus of hot spring, specialized high-pressure air blower of the textile apparatus, dentist’s apparatus high-pressure air blower of specialized high-pressure air blower is used in the paper cutter extensively, the oxygen machine falls in burning, filter rod forming machine, the slot liquid of electric plating is stired, atomize the drier, water treatment aerates, aquaculture, screen process press, take pictures platemaking machine, moulding plastics machine, automatic material loading dryer, liquid filling machine, filling machine of powder, electric welding apparatus, film machinery, the paper is transported, dry-clean the clothes, clean the use, dusting of air, dry bottle, the gas is conveyed, payoff, collect, water treatment in environment protecting mode, such trades as enviromental protection, aquaculture, screen printing, electric plating, dusting, food, packing, bottling, blown glass, air current for central dust collection are transported. Wait a moment.
The high-pressure air blower of new generation of the whole wind goes on the market in an all-round way, the regional agent of China is burning hot while recruiting, welcome the masses of commission agents to consult and negotiate.

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

GEMS shuttleless loom type circulate flow switch FS-200 direct

Brand: Gems – the intersection of Jem and person

Name: GEMS shuttleless loom type circulate flow switch FS-200 direct

Type: FS-200

About products:

Item Model Series FS-200- General directly circulating flow switch Sector application Plastics / rubber, vessel, engineering machinery

The products are detailed:

Name of product

U.S.A. Gems Company series FS-200- General directly circulating flow switch

Item Model

Series FS-200- General directly circulating flow switch

Sector application

Plastics / rubber, vessel, engineering machinery

Characteristic of the products

The flowrate is presumed: Fixed type: 0.5GPM to 100.0GPM; Variable type: 1.0GPM to 15.0GPM
Interface: 1″ NPT-2″ NPT
Essential structure material: Bronze or stainless steel
Set up the type: Fixed type or variable type

Download of related data

Every parameter

Connect the liquid material

Outer cover

FS-200: Bronze or 316 stainless steel
FS-200 is adjustable type: Bronze

Shuttleless loom

Teflon

Cover

Bronze or stainless steel

Spring

316 stainless steel

The others connect the part of the liquid

Viton? (viton) ,Pottery

Performance parameter

Switch

SPDT,20VA

Repeatability

1%Max.

The set point precision

± 10%

Set point deflection

15%Max.

Environmental parameter

Operating pressure

Withstand voltage: 400PSIG@100℉ (37.8 ℃)
Break and press: 800PSIG@100℉ (37.8 ℃)

Operating temperature

FS-200: -20℉ – +300℉ (- 29 ℃- +148.9 ℃)
FS-200 is adjustable type: -20℉ – +200℉ (- 29 ℃- +93.3 ℃)

Physical parameter

Electrically connected

No.18AWG, 24 ” is long, the lead wire of polymer

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

RB-077 the whole Fructus Averrhoae Carambolae air blower, RB-055 swirl air blower, RB-033 volution drum

Brand: Air blower of the whole wind

Name: RB-077 the whole Fructus Averrhoae Carambolae air blower, RB-055 swirl air blower, RB-033 volution air blower, RB-022 swirl air pump

Type: RB-022,RB-033,RB-055,RB-077,RB-1010

About products:

Our company supplies: RB-077 the whole Fructus Averrhoae Carambolae air blower, RB-055 swirl air blower, RB-033 volution air blower, RB-022 swirl air pump, the type is complete, quality assurance, the price is favourable, supply fast, welcome to call to consult to negotiate.

The products are detailed:

Our company supplies: RB-077 the whole Fructus Averrhoae Carambolae air blower, RB-055 swirl air blower, RB-033 volution air blower, RB-022 swirl air pump, the type is complete, quality assurance, the price is favourable, supply fast, welcome to call to consult to negotiate. The blade, wind of the high-pressure air blower of a wind cover and is made of H most hard ADC12 material in the world, it is equivalent to the equal material of steel rim of wheel of Benz.
The bearing of the high-pressure air blower of second, the whole wind adopts the high-speed, high temperature resistant imported bearing, 2800 rpms in case of 50Hz, 3450 rpms in case of 60Hz, avoid lubricating, non-maintaining. Support to run for a long time in 24 hours, the characteristic is stable and reliable.
Third, the whole wind wind gap of coming in and going out of high-pressure air blower fits the built-in sound-absorptive tube, thus it is with low noise to reach.
Fourth, type can total pressure use under the the whole the intersection of wind and high-pressure the intersection of air blower and 1.1KW.
Fifth, the whole wind high-pressure air blower is steady in pressure, handling the embodiment and employing through water treatment, electric plating proves, even mixed, it is highly unanimous that the ripples roll.
Sixth, the whole wind high-pressure air blower, at equal power, equal pressure, the flowrate is greater than the like product.
Seventh, the whole wind high-pressure air blower wind overlays and adopts the slice to distribute thermal design, it is equivalent to a motorcycle engine heat dissipating double-fuselage, have reduced the temperature of the runtime of the air blower greatly.
Eighth, the whole wind high-pressure air blower adopts the leading design concept of the bearing, two bearings locate in the blade forward end of the air blower and rear end of the motor, reach the preferably running balancing disposition, and do benefit to dispelling the heat.
(In that: The forward end of the blade has air-cooling fins that dispels the heat, and the bearing of the rear end works under the cooling-down fan attached of the air blower, thus keep the bearing making the long term operation at low temperature. )
Ninth, the whole the intersection of wind and high-pressure air blower adopt, resist shock while being special foot base design, thus reduce the intersection of air blower and vibrations that produce run, greatly.
Economic energy-conservation of high-pressure air blower of tenth, the whole wind. Under equal power, equal pressure, equal flowrate, the electric current of the high-pressure air blower of the whole wind is less than other similar products.
The high-pressure air blower of new generation of the whole wind goes on the market in an all-round way, the regional agent of China is burning hot while recruiting, welcome the masses of commission agents to consult and negotiate.

Tags: , , , ,

Monday, January 31st, 2011 Power & control products No Comments

TAG5000 high pressure wireless phase-check detector

Brand: Strong and good

Name: TAG5000 high pressure wireless phase-check detector

Type: TAG5000

About products:

Signal transmission of radio, receiving and comparing the kernel of principle has no wire, safer and facilitating the high frequency signal (433.9MHz) Can cross enclosure, baffle, door,etc., have wider suitabilities charged check-up on the spot, have reliable use of all-weather even more

The products are detailed:

TAG5000 high pressure wireless phase-check detector
Signal transmission of radio, receiving and comparing the principle
The kernel has no wire, safer, convenienter
High frequency signal ( 433.9MHz) Can cross enclosure, baffle and door,etc., the suitability is wider
Take electric check-up on the spot, have reliability even more
Use of all-weather
Radio wave is reachable 10 meters of transmission distance in the air
Kernel looks: Visual and audible signal
The outer cover of polycarbonate, very firm
Kernel one people operate and can also two people operate at the looks
Weight: Receiver ( Yellow) : 0.520kg; Projector ( Red) : 0.560kg
. The TAG5000 type complete phase checking device includes: Projector, receiver, probe, instrument container and specification.
Users must explain the voltage class while ordering: 10kV, 35kV, 110kV, 220kV ( Phase voltage)

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

(The air blower of the whole Fructus Averrhoae Carambolae, the air blower of Taiwan, the annular air blower of the whole wind,

Brand: The whole wind

Name: (the air blower of the whole Fructus Averrhoae Carambolae, the air blower of Taiwan, the annular air blower of the whole wind, the high-pressure air blower of Taiwan)

Type: RB-055

About products:

(the air blower of the whole Fructus Averrhoae Carambolae, the air blower of Taiwan, the annular air blower of the whole wind, the high-pressure air blower of Taiwan) Taiwan imports original packagingly, quality assurance, the price is favourable, welcome to call to consult to negotiate.

The products are detailed:

(the air blower of the whole Fructus Averrhoae Carambolae, the air blower of Taiwan, the annular air blower of the whole wind, the high-pressure air blower of Taiwan) Taiwan imports original packagingly, quality assurance, the price is favourable, welcome to call to consult to negotiate.

Eighth, the whole wind high-pressure air blower adopts the leading design concept of the bearing, two bearings locate in the blade forward end of the air blower and rear end of the motor, reach preferably work up flat

Weighing apparatus are disposed, and do benefit to dispelling the heat.
(In that: The forward end of the blade has air-cooling fins that dispels the heat, and the bearing of the rear end works under the cooling-down fan attached of the air blower, thus keep the axle

Bear and make the long term operation at low temperature. )
Ninth, the whole the intersection of wind and high-pressure air blower adopt, resist shock while being special foot base design, thus reduce the intersection of air blower and vibrations that produce run, greatly.
Economic energy-conservation of high-pressure air blower of tenth, the whole wind. Under equal power, equal pressure, equal flowrate, the electric current of the high-pressure air blower of the whole wind is less than producing other similarly

Taste. The high-pressure air blower of the whole wind is applied to all trades and professions extensively, for example: The high-pressure air blower of specialized complete wind of the filling equipment, the specialized complete wind high-pressure blast of sewage disposal

The machine, the specialized air blower of oxygenation of aquaculture, oxygenation pump, the high-pressure air blower of specialized complete wind of the electroplating device, the intersection of hot spring and the intersection of apparatus and specialized high-pressure air blower, the intersection of textile and specially apparatus

Use the high-pressure air blower of the whole wind, the high-pressure air blower of specialized complete wind of dentist’s apparatus, the high-pressure air blower of specialized complete wind of the printer, specialized complete Fructus Averrhoae Carambolae air blower of the woodworking machinery,

High-pressure exhaust fan, high-pressure ventilating blower, cool and force the ventilating blower, the high-pressure ventilator draught fan, suck the specialized swirl type high-pressure air blower of the material machine, the angry concentric type vacuum pump

The specialized high-pressure air blower of aquaculture, the specialized high-pressure air blower of sewage disposal, the specialized high-pressure air blower of the filling equipment, the specialized high-pressure air blower of the electroplating device,

The specialized high-pressure air blower of the apparatus of hot spring, the specialized high-pressure air blower of the textile apparatus, dentist’s apparatus high-pressure air blower of specialized high-pressure air blower is used in the paper cutter, burn extensively

Oxygen machine, filter rod forming machine, electric plating slot liquid fall to stir, atomize drier, aerating, aquaculture, screen process press, photo-engraving of water treatment

Machine, moulding plastics machine, automatic material loading dryer, liquid filling machine, powder filling machine, electric welding apparatus, film machinery, the paper is transported, dry-clean the clothes,

Clean use, air dusting, dry bottle, gas conveying, feeds, collects, water treatment in environment protecting mode, central dust collection enviromental protection, aquaculture, silk screen

Print, electric plating, dusting, food, packing, bottling, blown glass, air current trade of transporting etc.. Wait a moment.
The high-pressure air blower of new generation of the whole wind goes on the market in an all-round way, the regional agent of China is burning hot while recruiting, welcome the masses of commission agents to consult and negotiate.

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

The electronic rectifier uses the connecting terminal of spring loaded

Brand: JTS

Name: The electronic rectifier uses the connecting terminal of spring loaded

Type: STB710

About products:

Common spring loaded connecting terminal that the electronic rectifier uses

The products are detailed:


Technical parameter Value (range) UL technical data The interval of the products: 3.50mm

Nominal voltage: 300V

Rated current: 5A,10A

Line ball range: 16-20AWG

IEC technical data Cross the voltage class – class of pollution: 3 grades

Nominal voltage: 160V, 320V

Amount assaults the voltage: 2.5V

Specified section – rated current: 1.5mm2/5A

Material Insulating material: PA

The grade of inflaming retarding: UL94,V-0

Contact materials: Phosphorus table copper

The plate of contact point: Tin Plated tin plating

Other information PCB board aperture: 1.2mm

The length of wire stripping: 8.00mm

Screw | Force moment: -

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

High-pressure the intersection of unexplosive and air blower, the intersection of medium voltage and the intersection of explosion suppression and air blower, the intersection of type and unexplosive wind Pu completely

Brand: The whole wind

Name: High-pressure the intersection of unexplosive and air blower, the intersection of medium voltage and the intersection of explosion suppression and air blower, the intersection of type and unexplosive air blower Pu completely

Type: CX-100

About products:

High-pressure the intersection of unexplosive and air blower, the intersection of medium voltage and the intersection of explosion suppression and air blower, the intersection of type and unexplosive air blower Pu completely, it is one of the key products of our company, quality assurance, the price is favourable, welcome to call to consult to negotiate.

The products are detailed:

High-pressure the intersection of unexplosive and air blower, the intersection of medium voltage and the intersection of explosion suppression and air blower, the intersection of type and unexplosive air blower Pu completely, it is one of the key products of our company, quality assurance, the price is favourable, welcome to call to consult to negotiate.

The high-pressure air blower of the whole wind, introduces global and leading Japanese science and technology and preparation method of German Siemens, the company passes ISO9001: 2008 countries

The quality system of border is authorized, the air blower is authorized through European Union CE, sell well all over the world!
The high-pressure air blower of the whole wind is the advanced products in Chinese air blower trade, the characteristic is higher than the similar products, the whole wind high-pressure air blower adopts the special material to make

And become:
The blade, wind of the high-pressure air blower of a wind cover and is made of H most hard ADC12 material in the world, it is equivalent to the equal material of steel rim of wheel of Benz.
The bearing of the high-pressure air blower of second, the whole wind adopts the high-speed, high temperature resistant imported bearing, 2800 rpms in case of 50Hz, situation in 60Hz

Leave 3450 rpms, avoid lubricating, non-maintaining. Support to run for a long time in 24 hours, the characteristic is stable and reliable.
Third, the whole wind wind gap of coming in and going out of high-pressure air blower fits the built-in sound-absorptive tube, thus it is with low noise to reach.
Fourth, type can total pressure use under the the whole the intersection of wind and high-pressure the intersection of air blower and 1.1KW.
Fifth, the whole wind high-pressure air blower is steady in pressure, handling the embodiment and employing through water treatment, electric plating proves, even mixed, it is highly unanimous that the ripples roll.
Sixth, the whole wind high-pressure air blower, at equal power, equal pressure, the flowrate is greater than the like product.
Seventh, the whole wind high-pressure air blower wind overlays and adopts the slice to distribute thermal design, it is equivalent to a motorcycle engine heat dissipating double-fuselage, the ones that have reduced runtime of the air blower are warm greatly

Degree.
Eighth, the whole wind high-pressure air blower adopts the leading design concept of the bearing, two bearings locate in the blade forward end of the air blower and rear end of the motor, up to preferably move

Equilibrate the disposition, and benefit and dispel the heat.
(In that: The forward end of the blade has air-cooling fins that dispels the heat, and the bearing of the rear end works under the cooling-down fan attached of the air blower, thus keep

The bearing makes the long term operation at low temperature. )
Ninth, the whole the intersection of wind and high-pressure air blower adopt, resist shock while being special foot base design, thus reduce the intersection of air blower and vibrations that produce run, greatly.
Economic energy-conservation of high-pressure air blower of tenth, the whole wind. Under equal power, equal pressure, equal flowrate, the electric current of the high-pressure air blower of the whole wind is less than other similarly

Products.
The high-pressure air blower of new generation of the whole wind goes on the market in an all-round way, the regional agent of China is burning hot while recruiting, welcome the masses of commission agents to consult and negotiate.
The characteristic characteristic of the air blower of the whole Fructus Averrhoae Carambolae:
1,It is easy to install
The whole wind high-pressure air blower can be installed the compressed air to the location of use or be used for finding time at any time. And can install the competence or vertical direction arbitrarily.
2,The structure is firm
The high-pressure air blower body of the whole wind is cast with ADC12 aluminum alloy, is different from the air blower made of the general iron case or AC10 aluminum alloy, ADC12 material with

The same material of wheel drum of Benz car, sturdy and more duable.
3,Reliability is high
Except impeller, the whole wind high-pressure air blower does not have other moveable pieces, and impeller direct-connected motor, non-gear or drive belt, so reliability

It is high, nearly avoid maintenance.
There is no oil gas, pollution-free, when the impeller is rotated, do not disappear and keep in touch with any, avoid lubricating, so can guarantee that there is not oil gas absolutely.
4,It is shaken that it is low
The whole wind high-pressure air blower part adopts Germany, Japan to import processing, checkout equipment, turn round some parts and is set up the extremely accurate equilibrium

Count, test, correct so the shaking rate is very rudimentary.
5,With low noise
The high-pressure air blower of the whole wind uses and forces down the motor direct drive of the noise high, all there is inner sound-absorptive cotton in the entrances and exits, can reduce the noise while operating.

Tags: ,

Monday, January 31st, 2011 Power & control products No Comments

The vapour valve, vapour controlling valve, vapour electronic controlling valve,

Brand: OUMENS – door of Europe

Name: The vapour valve, vapour controlling valve, vapour electronic controlling valve,

Type: DN25-150 flange cast steel steam / high-temperature steam electronic controlling valve

About products:

DN25-150 flange cast steel steam / high-temperature steam electronic controlling valve matches the serial drivers completely from MR500 to MR6500, nominal force for from 500N to 6500N, can offer three float point pattern, proportional control type, many kinds of feedback signal; 24VAC/ 220VAC power can be chosen; Input / outcoming signal: 0(2) -10VDC, 0(4) -20mA can collocate and choose ‘ Only proportional control type) . The related valve body material is cast steel, the requirements range: DN25- DN150, connects and adopts the flange clash way, bearing: PN16/PN25/PN4

The products are detailed:

DN25-150 flange cast steel steam / high-temperature steam electronic controlling valve

Match until MR6500 all serial driver, nominal force for from 500N to 6500N, can offer three float point pattern, proportional control type, many kinds of feedback signal; 24VAC/ 220VAC power can be chosen; Input / outcoming signal: 0(2) -10VDC, 0(4) -20mA can collocate and choose ‘ Only proportional control type) . The related valve body material is cast steel, the requirements range: DN25- DN150, connects and adopts the flange clash way, bearing: PN16/PN25/PN40 is available. Apply to the cooler air-conditioner, heat supply dispatch control system extensively.

MR1800/MR3000 series driver technical parameter: Nominal force: 1800N/3000N Actual force: 1800N- 2000N/ 3000N- 3200N power consumption: 10VA (the point pattern that three float) /12VA (proportional control type) Input signal: 0(2) -10VDC, 0(4) -20mA (only proportional control type) Feedback signal: 0(2) -10VDC, 0(4) -20mA (only proportional control type) Run mode: Straight journey driver, maximum stroke 42 mm Support material: Press cast aluminium (pass superficial stain proofing) Top case material: Press cast aluminium (pass superficial stain proofing) Electrical machinery: Exchange the limit strength type Permanentmagnet Synchronism Motor The whole journey time: 125 second /40mm(50Hz) (concrete time is according to the journey of the valve body) Hand gear: For choosing (please replace N in the type as M such as needing manual function) The protection grade of chassis: IP54 The net weight of the products: 5Kg Pack the size: The width of 20cm long 18cm is 34cm high (without manually) ,The width of 20 cm long 18cm is 38cm high (bring manually) The ambient humidity is less than or equal to 95% RH ‘ 40 ℃) Ambient temperature- 10- 60 ℃(the point pattern that three float) /-10- 50 ℃(proportional control type) DN25- 50 corollary use 500N/1000N actuator, sees other pages in its technical parameter. 500N/1000N and 6500N driver technical parameter recommends please see the other products paging!


Cast steel steam of MF series flange / high-temperature vaporized valve body technical parameter: Requirements range: Steam / high-temperature vaporized DN25 two times …DN150, three-way steam / high-temperature vaporized DN25 …DN150 Leakage rate: Two / three-way DN25- N150 < KvS??0.02% Medium: Steam / saturated steam Medium temperature: 2 …+ 180 ℃ steam / 2 …+ High-temperature steam of 220 ℃ With the connecting screw-thread of pipeline: ISO 7/1, GB/T7306.1 and ANSI B 16.5. The flow characteristic flows: Wait for the linearity or when the percentage (users choose on the intelligent driver) The bearing of valve body: 1.6MPa, 2.5MPa, 4.0MPa Valve body material: Cast steel Valve plug material: Stainless steel Valve stem material: Stainless steel Containment structure: + Self-compensating of stainless steel spring V-type seal ring: Teflon The related synoptic diagram of two / tee:

Tags: , , ,

Monday, January 31st, 2011 Power & control products No Comments