Archive for February, 2014

Valve YX741 of the steady voltage that the YX741 -type variable type reduces pressure


YX741X diaphragm variable type reduces pressure the voltage regulation valve relies on one’s own energy to make outlet pressure remain stable to presume and plant, namely outlet pressure change because of inlet pressure and change of flowrate, and the intersection of valve and entrance of control system contain one clean filter screen since, utilize the fluid property, make proportion bigger having a bigger diameter suspended particle not enter the control system, guarantee the system circulates unblockedly, makes YX741X diaphragm variable type reduce pressure the voltage regulation valve can run safely and reliably.


Contacts: Ma Chao
Telephone: 86057767350717
Fax: 860577-67350722
Email: 77432141@qq.com
Web site: http://www.dinglivalve.com/
Address: Industrial area of west bank of north town of Ou of Yongjia county of Wenzhou of Zhejiang Province

Tags:

Friday, February 28th, 2014 Power & control products No Comments

Server DNTS-74 hour of network school

Serving device DNTS-8 hour of network school

Item Model: DNTS-8

The size of the products: 19 inches 1U

1-8 net mouths: The high precision of thermostatical Jingzhen is punctual

Product profile

The server DNTS-8 GPS/BD is a kind of Hi-Tech intelligence when China and Singapore of Beijing creates the network school where Science Technologies Co., Ltd. develops, but autonomous working based on NTP/SNTP agreement high-accuracy network server DNTS-8 GPS/BD obtain the standard clock letter from GPS or the Big Dipper geosynchronous satellite at the school Number information, transmit the information in the network, need apparatuses such as computers of the time signal in the network, apparatuses such as the control device,etc. can be in pace with standard clock signal. Can define priority at the time of simultaneously using GPS and the Big Dipper receiver, default and set up as the Big Dipper to have priority, GPS is reserve; At two no-signal receiver, network the intersection of server and DNTS-8 use Built-in: thermostatical Jingzhen keep time at the school, punctual precision reachable 1E-9. Network the server DNTS-8 uses canonial clock information to pass TCP/IP network transmission at the school, network the server DNTS-8 GPS/BD supports many kinds of prevailing time to release the agreement at the school, such as NTP, time/UDP, UDP that it can support to can be set up carries oral China and Singapore and achieves the time that the department defines data packet of the radio. The port numbers of NTP and time/UDP are affixed to 123 and 37 that RFC-123 and RFC-37 appointed respectively. DNTS-8 GPS/BD supports the broadcast work pattern of SNTP agreement at the same time

Network the intersection of server and DNTS-8 have three kinds of types at your choice at the school, the intersection of D network and for have 1 the intersection of 10/100M and ether net mouth of adaptation the intersection of server and NTS-81 at the school, the intersection of network and for have 2 the intersection of 10/100M and ether net mouth of adaptation the intersection of server and DNTS-82 at the school, the intersection of network and for have 4 the intersection of 10/100M and ether net mouth of adaptation, physical isolate among the net mouths the intersection of server and DNTS-84 at the school, totally guarantee data security, can set up the same subnet section or different subnet sections completely, redundant, a certain net oral trouble will not influence the normal operation of other net mouths. Each the intersection of ether and mouth must set up the independent IP address.

Detailed parameter

The precision of time service: 1-10ms

Support the agreement: NTP/SNTP V10,V20,V30,V40,SNMP,UDP,Telnet,IP,TCP

The net mouth quantity: 1-810/100M adaptation Ethernet

CPU: Pairs of the intersection of CPU and simultaneous working, 32-bit microcomputer CPU binuclear processor, characteristic and loud to raise

The receiver of the satellite: GPS, the dual system of the Big Dipper, but assigned priority

Punctual function: Precision reachable 1E-9 of permanent steady Jingzhen

Throughput: Satisfiable request of 2000 periods of time per second

Time service record: Keep 300 newly

Report an emergency and ask for help or increased vigilance here: LED instruction

Output interface: RS232/485,IRIG-B,10M,1PPS,

Contact: Manager Wen 15811237606



Contacts: Wen Xin
Telephone: 86010-62130080-207
Fax: 86010-6230078-204
Email: wx_365@hotmail.com
Web site: http://www.neutrontek.com
Address: Garden building A304 of grass No. 5 of No. of the temple of Haidian District soap monarch

Tags:

Friday, February 28th, 2014 Power & control products No Comments

Upper sea area METAL WORK gas control valves, METAL WORK electromagnetic valves 7020021200

METAL WORK Company establish on 1967, it is the intersection of Italy and second atmosphere that move the intersection of component and factory, produce the whole the intersection of pneumatic component and product of series, the staples includes the electromagnetic valve, the air cylinder, triple one, products of connecting etc.. It is a professional works including intact pneumatical system, its product possesses the high-quality and reasonable advantage of price, the life time of its air cylinder far exceeds the European counterpart. There is very great competitiveness in Europe. METAL WORK Company, METAL WORK electromagnetic valve agent, METAL WORK producer sells directly to households, the stock of the stock, sell metal work pneumatic component METAL WORK Company 70 serial electromagnetic valves of coaxiality meaning at a low price: SOV 2 3 S O S N C classification interface measurement function control type 14 reset mode 12 further information metal work pneumatic component 70 serial electromagnetic valves / other guide control the electromagnetic valve, the interface size is 1/8 ” 3/2,1/8″ Single automatically controlled normal open type type: S0V23SOSNO coaxiality: Pneumatic component 3/2 of 7010020400metal work, 1/8 ” Single automatically controlled closing type type: SOV23SOSNC coaxiality: 7010020200 Type: SOV23SESNC coaxiality: Pneumatic component 5/2 of 7010020500metal work, 1/8 ” Single automatically controlled type: SOV25SOSOO coaxiality: 7010021100 Type: SOV25SESOO coaxiality: Pneumatic component 5/2 of 7010021500metal work, 1/8 ” One pair of automatically controlled types: SOV25SOBOO coaxiality: 7010021200 SOV25SODOO 7010021300 SOV25SEBOO 7010021600metal work pneumatic component 3/2,1/8″ One pair of automatically controlled types: SOV23SOBOO coaxiality: 7010020100 Pneumatic component 5/3 of SOV23SEBOO 7010020300 metal work, 1/8 ” Type: SOV26SOSCC coaxiality: 7010022100 SOV26SOSOC 7010022200 SOV26SOSPC 7010022300metal work pneumatic component SPV26SESCC 7010022400 SOV26SESOC 7010022500 SOV26SESPC 7010022600metal work pneumatic component 70 serial electromagnetic valves / other guide control the electromagnetic valve, the interface size is 1/4 ” 3/2,1/4″ Single automatically controlled normal open type type: SOV33SOSNO coaxiality: 7020020400 3/2,1/4″ Single automatically controlled closing type type: SOV33SOSNC coaxiality: 7020020200 Pneumatic component 5/2 of SOV33SESNC 7020020500 metal work, 1/4 ” Single automatically controlled type: SOV35SOSOO coaxiality: 7020021100 Pneumatic component 5/2 of SOV35SESOO 7020021500 metal work, 1/4 ” One pair of automatically controlled types: SOV35SOBOO coaxiality: 7020021200 SOV35SODOO 7020021300 Pneumatic component 3/2 of SOV35SEBOO 7020021600 metal work, 1/4 ” One pair of automatically controlled types: SOV33SOBOO coaxiality: 7020020100 Pneumatic component 5/3 of SOV33SEBOO 7020020300 metal work, 1/4 ” Type: SOV36SOSCC coaxiality: 7020022100 SOV36SOSOC 7020022200 SOV36SOSPC 7020022300 metal work pneumatic component SPV36SESCC 7020022400 SOV36SESOC 7020022500 The guide control the electromagnetic valve outside SOV36SESPC 7020022600metal work pneumatic component 70 serial electromagnetic valves, the interface size is 1/2 ” 3/2,1/2″ Single automatically controlled normal open type type: SOV43SOSNO coaxiality: 7030020400 3/2,1/2″ Single automatically controlled closing type type: SOV43SOSNC 7030020200 Pneumatic component 5/2 of SOV43SESNC 7030020500 metal work, 1/2 ” Single automatically controlled type: SOV45SOSOO coaxiality: 7030021100 SOV45SESOO 7030021500 5/2,1/2″ One pair of automatically controlled types: SOV45SOBOO coaxiality: 7030021200 SOV45SODOO 7030021300 metal work pneumatic component SOV45SEBOO 7030021600 3/2,1/2″ One pair of automatically controlled types: SOV43SOBOO coaxiality: 7030020100 Pneumatic component 5/3 of SOV43SEBOO 7030020300 metal work, 1/2 ” Type: SOV46SOSCC coaxiality: 7030022100 SOV46SOSOC 7030022200 SOV46SOSPC 7030022300 metal work pneumatic component SOV46SESCC 7030022400 SOV46SESOC 7030022500 Above SOV46SESPC 7030022600 is some types of series 70, please telegraph our company to negotiate such as needing more products

Contacts: Huang QingZhong
Telephone: 86051287881518
Fax: 860512-82092292
Email: hqz120@163.com
Web site: http://www.ksdy518.com
Address: Do not lie between Room 3, No. 16 of the road in the intersection of Yushan and town

Tags:

Friday, February 28th, 2014 Power & control products No Comments

IT distribution system insulating monitoring device and solution GGF-I/GGF-O of supplying power of me dical place

Fit department’s auspicious IT power distribution system IT power distribution system insulation moni toring and warning device and solution of supplying power of medical place with the wide application in the field of hospital of the electronic medical equipment, the leakage current is greater and greater to the threat which the patient poses;
The leakage current of minification may lead to the fact the patient gets an electric shock dead. So, adopt TN system or TT system, and allocate the protection device RCD of residual current, when the leakage current exceed the drain accident of 30mA to take placing, RCD movements, the trouble loop of breaking. Even cause the medical equipment deenergization, will not cause great influence on the patient either like this, the doctor’s diagnosis or treating and can also be restarted.

1.1 ? ? Classification and power of the medical place are chosen
According to <>( GB16895.24-2005/IEC 60364-7-710:2002) Divide the medical place into 0 kind, 1 kind of and 2 kinds according to placement and place of using the abutting member to contact. Stipulate as follows:
0 kinds of medical places: Use the medical place of the abutting member, such as clinic, waiting room, massage parlour of the hospital,etc..
A kind of medical place: The abutting member is exposed to the outside of body and divided by 2 kinds of medical places stipul ate any part that the exterior abutting member invaded the body. For instance ward, delivery room, X-ray room of the hospital.
2 kinds of medical places: Use abutting member for, make a diagnosis skill, operating room, deenergization in the heart ‘ Trouble) Will jeopardize the important therapeutic medical place of the life. If the operating room of the hospital, cardiac catheter are inserted in room, ICU (ICU) ,the heart guards the room (CCU) ,angiography check room,etc..


The power in different places is chosen:
In 0 kinds and a kind of medical place, because of not there is not a medical equipment that using, or the relevant apparatus only uses some in the human body not mortality placement, so can use the power supply of the ordinary BLDG and protection measure of the drain. Generally adopt TN system or TT system, and allocate the protection device RCD of residual current, when the leakage current takes place to exceed the drain accident of 30mA, RCD movements, the trouble loop of breaking. Even cause the medical equipment deenergization, will not cause great influence on the patient either like this, the doctor’s diagnosis or treating and can also be restarted.


Patient in 2 kinds of places, is often in the state of incompetence, must rely on some medical equipments to maintain the life, or in operation state, any bring the life danger to patient about trouble at the medical equipment, so, must guarantee the reliability of the power system of the medical equipment electrically, guarantee the apparatus is less than 10? ? A to the patient’s direct leakage current, will guarantee under the leakage current or overcurrent condition again at the same time, there is reliable assurance of uninterruptible power supply. In view of the above-mentioned two respect factors, IEC60364-7-710: 2001 standards stipulate that must adopt IT power supply system in 2 kinds of places. Our country is in ” electric design specification of civil architecture ” (JGJ 16-2008) The string stipulates 12.8.6: In 2 kinds of medical places, are used for maintaining the life, surgery and other to lie in ” patient’s area ” Inner medical electrical apparatus and mains supply loop, should adopt the medical IT system.

1.2 ? ? National standard that the electricity distribution conceptual design of medical place accords with
Conceptual design accords with the following national standards:
JGJ16-2008 ” electric design specification of civil architecture ” ;
60364-7-710:2002 <>;
GB7251.1-2005 <>.

1.3? ? Leading particulars of the electricity distribution scheme
It is combined that the whole power distribution system with the hospital is perfect;
The ones that realized information through the bus line of communication are mutual, benefit the centralized monitor of the system;
Modular design, the integrated level is high, field installation is convenient;
Isolate the power to totally isolate with the electric power supply, improve safety and reliability of supplying power;
Design according to the national standard requirement, and can well meet domestic and foreign market demand.

1.4? ? Whole electricity distribution scheme synoptic diagram of 2 kinds of places of medical treatment

1.5? ? Different solutions to different places
1.5.1 ICU, the intersection of CCU and ward worthy of, it electrolyzes to be scheme ‘ Isolate the system graph of the switch board as example) with GGF-I8

Configuration table of the scheme

1.5.2 Operating room worthy of it electrolyzes to be scheme ‘ Isolate the system graph of the switch board as example) with GGF-O8

Configuration table of the scheme

2 medical use isolates the power cabinet
But the switch board with some IT system of the design of power supply demand which is for 2 kinds of places of medical treatment that the medical use isolates the power cabinet, the insulating state of the monitoring system that IT system installs the insulation monitoring and w arning device, each exporting the loop adopts the circuit breaker with short-circuit protecting function; Other system output return circuits have adopted the circuit breaker with earth leakage protection fu nction. The products divide and use and isolate two big classes of power cabinet by isolating wards such as p ower cabinet and GGF-I series ICU/CCU,etc. for the GGF-O series operating room based on different location of uses, can well meet all kinds of operating rooms and requirements for power safety and reliability of ICU, accord with 60364-7-710:2002 <>And standards such as GB7251.1-2005/IEC 60439-1:1999 ” complete set of switch apparatus and control equipment of undervoltage ” ,etc.

2.1? ? Technical parameter

2.2? ? Products naming rule

2.3? ? Information of ordering goods

2.4? ? Products physical dimension

3 AITR series isolate the voltage transformer
Series AITR isolate the voltage transformer and is specially used in the medical IT system, the products core adopt the silicon electric sheet that Japan imported to superpose, it is very small to loss. Have adopted double insulating treatment between coil and coil, and designed electrostatic screening to reject, have reduced the electromagnetic disturbance between two coils to the greatest extent. Having installed PT100 temperature sensor in the coil, it can be used for monitoring the coil temperature. The voltage transformer adopts the vacuum to invade the paint to deal with wholly, has increased the mechanical strength and resisted corrosive action. In addition, the products have been also adopted and risen and low-noise and designed at low temperature, is it warm to make it have the very good one? ? Characteristic and very low noise.

3.1? ? Naming rule

3.2? ? Accord with the standard
GB19212.1-2008/IEC 61558-1: 2005 <>;
GB19212.16-2005/IEC 61558-2-15: 1999 <>;
60364-7-710:2002 <>.

3.3? ? Performance parameter

3.4? ? Physical dimension and lectotype

Isolate the voltage transformer physical dimension

4 AIM-M100 insulating monitoring instrument
AIM-M100 insulating monitoring instrument is a high-performance insulation monitoring and warning dev ice, are used particularly in the medical IT system, the state of insulation that is use for monitoring IT systematic over the ground, when the system presents the insulation fault, can send out the alarm signal in time, remind staff members to deal with according to the actual conditions. The products have abundant display and warning directive function, the interface is friendly, easy to operate.

4.1? ? Product function
Monitor the insulation resistance of IT systematic over the ground, voltage transformer load current, coil temperature of voltage transformer monitored with the trouble warning function in real time;
Can monitor in real time and is wired disconnection fault, disconnection fault of the temperature sensor and earth lead disconnection fault of the function with the Implementation Under Test ITU, and provide the warning instruction while taking place in trouble;
The electrical relay calls the police outputted, LED many kinds of trouble directive functions of pointing out etc. of calling the police;
Adopt advanced on-site bus communication technology, and connect calling the police and the display instrument, upper computer management software communication, can real-time monitor the operation conditions of IT system;
Have logging functions, can record and call the police for time and trouble type when take place, facilitate operating personnel’s real-time analysis system operation conditions, debug in time.

4.2? ? Accord with the standard
60364-7-710:2002 <>;
IEC 61557-8-2007 <>.

4.3? ? Technical parameter

4.4? ? Appearance and installation size

5 AID100 calls the police and display instrument
AID100 call the police until display instrument one agreement to reveal and sound and light alarm ins tall on the basis of MODBUS? ? . Can reveal the monitoring data, and give out the acoustooptic alarm signal in the trouble. This device can be installed on the operating room or inner information faceplate of ICU, so that hospital personnel understand the operation conditions of isolating the power system, and the trouble type while breaking down systematically.

5.1? ? Product function
Have insulation resistance, real-time display function of the load rate of voltage transformation;
But the long-range warning threshold value of setting up the insulating monitoring instrument;
Adopt the technology of on-site bus communication, can obtain monitoring data and warning message of the insulating monitoring instrument in real time;
The all right sound and light alarm at the time of the trouble, after pushing and subdueing the key, the sound closes, the corresponding trouble lamp will not go out, until the failure solution.

5.2? ? Accord with the standard
60364-7-710:2002 <>.

5.3? ? Technical parameter

5.4? ? Appearance and installation size

6 ACLP10-24 direct-flow stabilized voltage supply
The dedicated direct-flow voltage regulation module of instrument, adopt the totally isolated linear voltage transformer. Export the voltage stabilization, the characteristic such as being high of the little, pressure tight grade of the ripple, and there is power up directive function of power. The module adopts the way of installing in the standard guide rail, the all right and insulating monitoring instrument installs on the same guide rail, it is convenient to install.

6.1? ? Accord with the standard
GB19212.1-2008/IEC 61558-1: 2005 <>;
GB19212.16-2005/IEC 61558-2-15: 1999 <>.

6.2? ? Technical parameter

6.3? ? Appearance and installation size

7 protective type current transformers
The current transformer of the Model AKH-0.66P26 is the protective type current transformer insulated from AIM-M100 corollary use of the monitoring instrument, the measurable electric current of maximum is 50A, transformation ratio is 2000: 1,The current transformer adopts the screw directly the stationary way is installed in the cabinet insi de, secondaly side draws through the binding post, it is convenient to install and use.

7.1? ? Technical parameter

7.2? ? Physical dimension picture



Contacts: Wu HaiYing
Telephone: 86021-33510314
Fax: 86021-69155331
Email: acrelwhy@163.com
Web site: http://www.acrel.cn/cn/
Address: Jiading district Ma Dong industrial park of Shanghai breeds the green road No. 253

Tags:

Friday, February 28th, 2014 Power & control products No Comments

H44Y/H41Y high-temperature high-pressure check damper H44Y/H41Y

The products quote the standard
Design and manufacture: ANSI B16.34 E101
Structure length: ANSI B16.10 E101
The temperature grade of the pressure: ANSI B16.34 E101
Test and examine: API598 E101

Use of the products


One pound of swing check valves of hydropower station is suitable for Class1500- 2500Lb, on pipe lines of different working conditions such as operating temperature – 29- 570 ¡æpetroleum, chemical industry, fire power hydropower station. The Applicable medium is: Water, oil, steam,etc..


Structural features of the products


1.The products are designed and made according to ANSIB16.34, E101 standard, can allocate and use with the import equipment.
2.The lumen adopts the self-fastening containment structure of the pressure in the valve, the better the sealing property the taller in pressure of inner chamber is. Both ends of the branch line are 3. Both ends of the branch line are connected for welding neck, meet the needs of different take overs.
4.The pressure tight part of the valve chooses the high-quality heat-resisting alloy steel to make, the high temperature behavior is good, it is high, durable, safe, reliable to bear the pressure.
5.The sealing surfaces of valve clack, valve seat adopt the department to set up (stellite) very much The carbide build-up welding of the cobalt base is wear-resisting, high temperature resistant, it is of good performance and having long performance life to resist and abrade.
6.Valve clack rotate around the intersection of valve seat and exterior axis pin, reduce close, happening, assaulting while being fierce.
7.Built-in pin axle construction, reduce and let out some outside, use more reliably.


The material of the major part explains

Valve body


WCB


WC1


WC6


WC9


Valve cover


25


15CrMoA


12Cr1MoVA


12Cr1MoVA


Valve clack


WCB


WC1


WC6


WC9


Joystick


WCB


WC1


WC6


WC9


Valve seat


25


15Cr1MoA


12Cr1MoVA


12Cr1MoVA


Axis pin


1Cr17Ni2


20Cr1Mo1V1A


Packing


Strengthen the soft graphite




Contacts: Lu Bin
Telephone: 86021-52193584
Fax: 86021-52193584
Email: nqvalve@163.com
Web site: http://www.nqvalve.com
Address: Xuhui District imperial Wu road No. 400 of Shanghai

Tags:

Friday, February 28th, 2014 Power & control products No Comments

P16LAR3-1AB Taiwanese DECA enters to unite the button switch P16LAR3-1AB of emergency stop

Type: P16LAR3-1AB

Comments: DECA enters to unite the urgent stop switch of very beginning of mushroom

Joint: 1AB(1NO+1NC)

End cuckoo dose: Socket type

Color: Yellow, green, red, blue, white, orange

Function: Replacing type, auto-lock

A large number of stock

Main products: Original packaging Taiwan ” whether DECA stock unite” the whole series of products
The products include: 16mm push switch, 16mm pilot lamp, 16mm scram switch, 16mm selection switch, 16mm key switch, 22mm push switch, green PCB connecting terminal, black PCB connecting terminal.
The products are passed: ROHS, there is UL, CE, VDE, CSA, ENEC, CQC, authorizes
§¶ 16mm. Brief introduction of §¶ 22mm installing hole push switch specification,
Working electrical behavior: 250V/5A.AC, 24V/6A.DC, withstand voltage: 2000V, 60Hz, 1min
Ambient temperature: -40T85 ¡æ, soldering temperature: 280 ¡æ4ses, contact resistance: 10mΩ ,Insulation resistance: 100 mΩ
16mm installing hole switch type: <>
16mm installing hole switch type: Mushroom head: P16LAR3-1AB(1NO+1NC)



Contacts: Li ZhiPing
Telephone: 8613522069945
Fax: 86
Email: 1602909393@qq.com
Web site: http://shop71175090.taobao.com
Address: Flat 1503 1, No. 82 of Chaoyang District E.4th Ring Road Middle Road of Beijing

Tags:

Friday, February 28th, 2014 Power & control products No Comments

Float and produce oil and fit FDXS

Fdxs floats and sucks the oil device – -The arm floats

Our company in recent years, produce and float mainly of complete network integrated type to float to inhale the oil device, make it carry and float arm to be organic to take over a job not to float.

First, float ordinarily and suck the oil device

1,Use:

The floating type of the oil tank produces oil the device is suitable for expecting much to hair oil quality, the settling time of oil is short, fuel such as the apparatus turnover of the oil tank are received and dispatched and used in the supply system. The hair oil device of this floating type is to utilize sinking the grand principle in the action of gravity of moisture impurity, release the clean high-quality fuel of upper strata preferably, guarantee it is best in quality that the oil sent out reaches. The floating type producing oil device is fixed on the inner dispatcher’s oil device of the oil storage tank, this product is suitable for liquid such as petrol, kerosene, diesel oil, engine oil, therefore adopt extensively for oil depots such as the oil depot, oil refinery, civil aviation, seaport, quay,etc..

2,Characteristic: n



Contacts: Yuan YiQuan
Telephone: 860731-83202696
Fax: 860731-83202696
Email: yuanyiquan@163.com
Web site: http://www.csht.cn
Address: Latitude two way of manufacture base of Hunan Liuyang industry

Tags:

Friday, February 28th, 2014 Power & control products No Comments

Pneumatic fixed ball spherical valve Q647


The name of product: Pneumatic fixed ball spherical valve, pneumatic Y type fixed ball spherical valve, pneumatic stainless steel fixed ball spherical valve, pneumatic cast steel fixed ball spherical valve, pneumatic carbon steel fixed ball spherical valve, the fixed ball spherical valve of pneumatic single function, the fixed ball spherical valve of the pneumatic double-action, pneumatic fixed ball flange spherical valve, the three-way spherical valve of pneumatic fixed ball
Item Model: Q647, Q649, Q648, Q640
The spherical valve product introduction of pneumatic fixed ball:
Pneumatic fixed ball spherical valve ( Q647F) Fix the intersection of ball and spherical valve through make up after the debugging by pneumatic actuator, allow the intersection of fire source and power,etc. at the special working condition, can realize remote control or remote common control or in some high altitude. Have saved human resources and time and raised the safety of the homework to a great extent. The pneumatic fixed ball spherical valve uses compressed air as power to drive the valve plug to rotate, get the result of opening or regulating. The fixed ball spherical valve contains the preloading device to guarantee the leak tightness of this valve in the valve. Choose different materials, can be suitable for many kinds of mediums such as water, steam, oil, nitric acid, acetic acid, oxidative medium, urea respectively.
The performance parameter of the main frame:
1.Pneumatic fittings: Single function air cylinder, double acting air cylinder, electromagnetic valve, triple one, positioner, limit switch,etc..
2.Transmit: Hand wheel, worm gear, bevel gear, it is pneumatic /electronically (be brought manually)
3.Connect: Female screw thread, external thread, flange, welding, to clamp type, caliper, cutting ferrule
4.Structure: Floating ball, fixed ball, direct, (the tee of Model T/L) , the straight cross, hemisphere are direct,etc..
5.Seal: It is sealed, hard and sealed, lined with the glue, lined with Fluorine etc. that soft.
6.The requirements: DN15≤ DN800
7.Temperature: 0 ¡æ& le; 550 ¡æ
8.Pressure: 0.6Mpa≤ 4.0Mpa
9.Valve body material: Stainless steel, cast steel, carbon steel, casting iron,etc..
10.Applicable medium: Water, oil, steam,etc.. An outstanding pneumatic valve door of Shanghai is professional to make pneumatic fixed ball spherical valve product series: Quality is reliable, the characteristic is steady. Outstanding a pneumatic valve of door products are the choice that you rest assured, our goal: Quality is first-class, serves first-classly. Quality assurance of one year (guarantee to repair free of charge, guarantees replacement, caveat vendor) Besides artificial damage

Contacts: Manager Zheng
Telephone: 8602151602596
Fax: 86
Email: shjieyifamen@163.com
Web site: http://www.tm-fm.com
Address: Minhang District of Shanghai

Tags:

Friday, February 28th, 2014 Power & control products No Comments

Pneumatic cylinder valve air supply component of the gold vessel

MINDMAN electromagnetic valve

MVSC-220-4E1AC110 MVSA150, MVSA156, MVSA180, MVSA260, MVSA300, MVSB180, MVSB188, MVSC/D180, MVSC220, MVSC260, MVSC300, MVSC460, MVSE260, MVSE300, MVSE500, MVSE510, MVSE600, MVSF100, MVSI260, MVSI450, MVSI510, MVSN300, MVSY100, MVSY156, MVSY188, MVDC220, MVDF100, MRB, MRC, MYA, MYS, MGA, MGS, MED, MGD, MEP, MUD, MUA, MUDC, MSUS, MUAO, MUW, MUG, MUAV, MUS, MUW-NO, MSU MINDMAN pneumatic &’s mechanical valve MVAA150, MVAA180, MVAA220, MVAA260, MVAA300, MVAA460, MVMA260, MVMA300, MVMB220, MVMB250, MVMB300, series EPA, series ACT, MVMC210, MJV-3, MJVO-3, MJTV-3, MJTV-5, FV-5P and manual valve series MVHA, series MVHB; Stop valve MVHA series series MVHC, series MVHS, pedal valve series MVFA; MINDMAN

Make up at three o’clock: MACP200,MACP300,MACP400,MACP401,MACP410,MACP500,MACC300,MACT300,MACT300L,MACT400,MACT401,MACT410,MACT500; Filter, the pressure regulator: MAFR200,MAFR300,MAFR300L,MAFR 400,MAFR401,MAFR410,MAFR500; Filter: MAF200,MAF300,MAF300L,MAF400,MAF401,MAF410, MAF500,MAF900,MAF901; Pressure regulator: MAR200,MAR300,MAR301,MAR400,MAR401,MAR410,MAR500, MAR510,MAR900,MAR901; Lubricator: MAL200,MAL300,MAL300L,MAL400,MAL401,MAL410,MAL500, MAL900; Accurate filter: MAF300LD/M,MAF401A/D/M,MAFF401AD/DM,MAFRF401,MATFR401; Automatic drainer: MAD400/401,MAD500,MAD500M,MAD501,MAD501H; Automatic discharge valve: MADV200, MADV300, MADV 400, the digital type condenses water and gets rid of the time-recorder: MBS,MCS,MBD; The compressed air of overflow type uses the water filter MWA-300; Induction switch MPS of the pressure; Pressure gauge PG;

The first brand of Taiwan, quality assurance, complete service.

Contacts: Zhang XiaoMan
Telephone: 86020-31674956
Fax: 86020-31674956
Email: nezdh688@126.com
Web site:
Address: Guangzhou invites the street No. 6 in the west of Middle Road of grand sight of river reach on day

Tags:

Friday, February 28th, 2014 Power & control products No Comments

60KVA three-phase four-wire variable frequency power supply YF-3660



Contacts: Yang Sheng
Telephone: 860755-29360016
Fax: 860755-27049539
Email: yanghongpinpai@163.com
Web site: http://www.sps1688.com/
Address: High-new sci-tech park of view billows of billows street of the view of Baoan district of Shenzhen

Tags:

Friday, February 28th, 2014 Power & control products No Comments