Archive for November, 2015

Pay attention to and grind the safe light curtain SEII-48SEII-48

Pay attention to and grind the safe light curtain SEII-24, SEII32, SEII-40, SEII-48, pays attention to and grinds safe light curtain SE¢ò – 24, SE¢ò – 32, SE¢ò – 40, SE¢ò – 48
About products:
This product is suitable for the personal safe protection in dangerous machinery such as puncher, hydraulic press, moulding plastics machine, press-casting machine, packer, paper cutter, industry manipulator, prevent operating workers and lack proper care because of spirit concentrating on or movements, causing limbs is run over and injured mechanically.
Adopt I.C to control, the original creation monitors the return circuit oneself, can guarantee lathe attenbant’s security even more;
The response time, within 15¡ë seconds, if the part of any of light is the interdiction, will send out the order of shutting down rapidly, make the puncher slip one stop immediately, avoid operator’s fault and cause the injury;
Protect, highly choose from 200mm to one kind of specifications of 440mm4.
Because of adopting infrared ray way, hinder job field with concealing anything, guarantee even more that there are open visual fields.
Because of adopting and reflecting the way, installation only needs smaller space, thus can guarantee the wide job mesa, it is all very easy to install and mix the line.
Because of the accurate security design, while losing electrical power and other troubles happen, can suspend the movements of the puncher in time, so the one that rested assured further carried on the homework.
Complete self-checking system, when exporting the relay and happening openly and brokenly and badly, can check through the auxiliary relay. Moreover, it checks whether the function keeps in the normal working state, can confirm by manual inspection button.
Slip piece can presume, for the invalid state, would not lower working efficiency safety device so rise.
The mere sensor has adopted the special filter, has improved and resisted corrupt and dampproof ability.
” average life span of SEII safety device ”
Under certain condition(25 degrees of room temperature, energize allowing in electric current of direction: 1F=20mA) ,Have paid and given out light the result of testing and outputting the characteristic in giving out light and testing for continuous open some time of the unit, 2% of the decay exists during 5000 hours in its present luminescence unit, such as calculating according to such data, need 125000 hours when weakening to 50%. Even the duration when assumes for each month is 720 hours (24 hours of every day, there are 30 days in every month) ,The result calculated like this equals 173.6 months, namely there is life-span in 14.5 years.
Warn: Such as installing the photoelectricity protecting device in applying the brake the lathe of the device promptly, the photoelectricity stops working at some o’clock only in the drift lies, when the drift runs downwards, even shelter from the light with hands, the drift will not be stopped either, users should be extremely careful!

Contacts: Han SongKui
Telephone: 860755-29412192/91/90
Fax: 860755-29179602
Email: sales@sztianwei.net
Web site: http://www.sztianwei.net/
Address: Flat H of the 21st floor of the mansion of the centre of era on the way of well centre of sand of Baoan district of Shenzhen (upstairs of Industrial and Commercial Bank)

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Resting to compensate the apparatus INAS-S-75KVAR-04-380 synchronously

Type: iNAS-S-75kvar-04-380V


The unit compensates the capacity


75kvar


Exchange input


Specified voltage


380 x (1± 15%) V


Can apply to 6kV, 10kV and 35kV system through the voltage transformer


Specified frequency


50 x (1± 2%) Hz


Wiring way


Three-phase Line four


Technical indicator


The harmonic wave compensates the number of times


2-50 times


The harmonic wave compensating rate


In the specified capacity ¨R 95% ‘ ¨R 20%) of distortion rate of load


Power factor of the goal


Reach and presume the requirement within the range of capacity


Compensate the way


Rely mainly on there is no work to compensating, it is available to pay the function for the harmonic wave


The whole response time


< 5ms


Overload protection


Limit to the specified electric current and export automatically


Whole consumption


< Device capacity 3%


Noise


< 65 dB(A)


Environmental condition


Working temperature


-10 ¡æ- 45 ¡æ


Store the temperature


-20 ¡æ- 65 ¡æ


Relative humidity


< 90% (at 25 ¡æ)


Work pattern


Work continuously automatically


Interface of communication


Long-range RS485/RS232 / communication function of Ethernet (apolegamy) ; Go the intersection of location and the intersection of plane and the intersection of communication and software ‘ Apolegamy)


Operation reveals


LED controls the panel; The parameter is set up to run; Touch buttons to operate; Many parameters reveal


Reveal the precision


& plusmn of electric current; 5%FS


Expand ability


Of the same type to combine the machine directly, the quantity can be up to 10


Protection


Electric wire netting pass owe, press and electric wire netting lack looks, device pass flow, device overheated direct-flow bus bar pass, owe, press and automatic limit of overload shed and protect by mistake


Unit size W x D x H (mm)


800 x 800 x 2200


Install the requirement


The mounting point has not been shaken vigorously, without electric conduction and explosive dust, there is no gas of corrosivity, the slope is not greater than 5& deg;


Protect the grade


Ip43 (high to can be customized to protect the grade)


Second, resting has no definition of the work compensator synchronously

It does not have a work compensator (STATic synchronous COMpensator, abbreviates as STATCOM) synchronously that resting It is the flexibility – exchange the technology of transmission of electricity (Flexible ACTransmision System, is abbreviated as FACTS) Main for one of device,it is last device without work not to belong to by connecting in parallel type, it power system last technology new developing direction as work on behalf of stages modern. It can send out or absorb the inactive power, and it can change to output in order to control the particular parameter in the power system; General, it is a kind of solid switch current transformer, when its input terminus is connected with the power or energy storage device, its output end can send out or absorb the controllable gaining merit and inactive power independently.

In the distribution network, it is (such as assaulting such as the electric arc furnace, subway and commutating load) to install STATCOM of the medium and small capacity in some special load Nearby can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the intersection of power and factor, uneven to overcome three-phase, dispel voltage, flash, become with voltage fluctuating, inhibiting particular time ‘ 3, 5, 7, 11Time) The harmonic wave is polluted etc..


Third, iNAS-S is resting not so brief introduction of as a work compensator synchronously

Series iNAS-S are too resting to have a work compensator with one pair of digital signal processors (DSP) synchronously It is a core, will connect in parallel on the electric wire netting changing the bridge type circuit of looks through the reactor, adopt the real-time data to gather technology and follow technology dynamically, is monitoring the voltage, electric current of electric wire netting and system constantly, adjust the systematic inactive power in fast and continuous compensation and at the same time, can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the power factor, overcome three phases unevenly and dispelling the voltage and flashing and turning into and fluctuating, inhibiting the harmonic wave from polluting etc. with the voltage.

Fourth, iNAS-S is too resting to have work compensator products advantage synchronously

Series iNAS-S are too resting to have work compensator that has already become and compensated the inactive power, improved the strong tool of electric energy quality synchronously. The key device IPM module of this technology, than GTO (the brilliant floodgate is in charge of) The component has quicker switch frequency, and shut off the capacity and already reached certain scale, so iNAS-S device has quicker response characteristics.

Have a lot of ripe measures that are solved as to the voltage quality problem at the time of the steady state; But to the dynamic electric energy quality problem, depend on the traditional one does not have work is compensated and straining the wave device conventionally can’t be solved effectively, because for example the voltage falls(sage) , the wave is welled up (surge) , voltage pulse (impulse) With instantaneous power failure (outage) This kind of electric energy quality problem duration is very short and changing quickly, and some electric energy quality problem is still accompanied by some even situations such as all meritorious losses,etc..


Series iNAS-S are too resting to have a work compensator on the basis of SVC device synchronously, have overcome SVC products because of presenting the permanent impedance characteristic, make when the voltage is low, unable to offer the necessary one to have no work to support, it is relatively weak to deal with the ability of the accident; And floor space large, too much SVC apt to initiate the intersection of system and the intersection of person who shake and drawback, to have the intersection of work and electric current it outputs to be can invariable in the very large the intersection of voltage and range of variation iNAS-S, can still offer the more strongly one to have no work to support when the voltage is low, and can arrive to holding the whole range from perception and regulate continuously, make it have no work to compensated and equivalent to with 1.4- 2 times of the capacity SVC; Because flexible high pressure of iNAS-S, can also reduce voltage transformer, divide number of times of switch connected into greatly, thus connect the number of times of the trouble in mitigation. In addition, iNAS-S can also inhibit the voltage from flashing and changing, raise the system temporarily the attitude stabilizes competences, combine our country’s conditions and existing technology, development resting to have work it compensates technology to be to solve the voltage of our country and stabilize the effective means of the problem synchronously, and the main direction of FACTS technical development.


Fifth, technological characteristic

The traditional one has no work to compensate the device to realize and have no work to compensate through regulating the electric capacity or inductance, though it is extensive to employ, it is slow that there are resonance, response time, can’t improve three phases unevenly, can’t offer a great deal of problems such as active power.

INAS-S is too resting to have a work compensator STATCOM synchronously, it no longer adopts high-capacity electric capacity, inductance device, but realize that there is not variety of work energy through the high-frequency switch of the electric electronic device of high-power, making has no work to compensate the step of a quality technically.

Series iNAS-S are too resting to have a work compensator synchronously

1.Respond to faster, have work that compensate the apparatus to can totally substitute the original low pressure

2.The voltage makes a variation stronger

3.Have chance with the apparatus, the range of running is wider

4.Can offer the active power within the specific limits

5.It is strong to inhibit harmonic ability once particularly

6.The electromagnetic noise is reduced notably

7.The power losses low, economize on electricity the result is prominent

8.Can solve the three-phase uneven problem

9.At apparatus compensate at range can factor power bring up to and last 1.0,can & ldquo; Handle up & rdquo; Inactive power, compensate continuously, will not have produced the question of mending or undercompensation




Contacts: Manager Huang
Telephone: 86075533202178
Fax: 860755-33202179
Email:
Web site: http://www.inasmotion.com
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea

Tags:

Monday, November 30th, 2015 Power & control products No Comments

XPT135 liquid location changer XPT

The location of liquid changes the giving device XPT

First, summary
XPT the intersection of *W and series pigeonhole the intersection of liquid and location of hindering etc. changer whether one totally enclosed person who slip into spread the intersection of silicon and the intersection of liquid and location, measure instrument. Electronic element and key part select the international high-quality and army grade products for use within this instrument, guarantee this series of products have precision high stability with high, long-term dependability is good, low grade characteristic of the fault rate. Product this adopt unique sealed structure and keep in touch with cable while being specialized, enable changer long-term reliable using in other liquid underwater, the price of performance is higher, it is very convenient to install and use.
The liquid location of the Model XPT135W changes giving device into an organic whole type structure, can put into water and use directly for a long time, a location and range can’t be adjusted.
Ones that gather four Fluorine structure completely are able to bear the strong acid, alkali products.
Second, technical parameter
Range (FS) : 1 2 5 10 20 50 100 200mH20
Have allowed to press: Full range pressure of 2 times
Linear error: 0.2% FS (generally) ; 0.5% FS is the (biggest)
Stability error:
Range >20mH2O 0.2% FS (generally) ; 0.5% FS is the (biggest)
Range & le; 20mH2O 10mmH2O (generally) ; It is the 20 mmH2O (biggest)
The temperature drifts about:
The zero point drifts about, % FS / one ¡æ of sensitivities drifts about, % / ¡æ
Range> 10 mH2O
0.005 (generally) ,0.01 is the (biggest) 0.02 is the (biggest)
Range & le; 10 mH2O
0.01 (generally) ,0.02 is the (biggest) 0.02 is the (biggest)
Range & le; 5 mH2O
0.015 (generally) ,0.03 is the (biggest) 0.02 is the (biggest)
Range & le; 2 mH2O
0.025 (generally) ,0.05 is the (biggest) 0.02 is the (biggest)
Use the temperature range: -10- 80 ¡æ;
Store the temperature range: -40- 120 ¡æ
Transmission means: Line two
Power voltage: 15- 28VDC
Output signals: 4- 20mADC
Support (& Omega) : < (u-12V) /0.02A

Install the method:
The installation direction of the changer is in order to install downwards vertically. While moving and using in water, must pay attention to, make reaction parallel to rivers directioning.
Changer in order to prevent the shock power when fetching water with water pump to shake and damaging the changer, the changer should be far away from the liquid entrances and exits to lay. Otherwise should adopt the steel tube to protect.
It is (such as river, reservoir area) to install in moving water Need to add the still water device and insert the steel tube (see Fig. five) in the water course . Require steel tube wall thick a little, and different height fight several apertures on it, and dispel the influence of moving the strength of water pressure with the damping ripples.
Generally use the method to insert steel tube. Require the steel tube not to bend, the internal diameter must be greater than 50mm, make several apertures at different height of the steel tube, it is easy to mention moving and unobstructed entry of water from head to foot. If necessary, can twine the steel wire on the changer, carry and move from head to foot with the steel wire, so as not to break the cable thread.
Install attention
Range whether the static pressure that the liquid in the installation site may be produced will exceed the changer.
Whether the liquid examined accommodates structural material of the changer.
Will the liquid examined stop up entering the liquid hole of the changer


Contacts: Manager Li
Telephone: 8615091679146
Fax: 86029-88217610
Email: lizhaozhao100@163.com
Web site: http://xalthyyxgs.b2b.hc360.com
Address: Scientific and technological way of Xi’an of Shaanxi

Tags:

Monday, November 30th, 2015 Power & control products No Comments

There is no work to compensate and control INAS-S-400KVAR-04-38 with the harmonic wave

First, product introduction and parameter

Type: iNAS-S-400kvar-04-380V


The unit compensates the capacity


400kvar


Exchange input


Specified voltage


380 x (1± 15%) V


Can apply to 6kV, 10kV and 35kV system through the voltage transformer


Specified frequency


50 x (1± 2%) Hz


Wiring way


Three-phase Line four


Technical indicator


The harmonic wave compensates the number of times


2-50 times


The harmonic wave compensating rate


In the specified capacity ¨R 95% ‘ ¨R 20%) of distortion rate of load


Power factor of the goal


Reach and presume the requirement within the range of capacity


Compensate the way


Rely mainly on there is no work to compensating, it is available to pay the function for the harmonic wave


The whole response time


< 5ms


Overload protection


Limit to the specified electric current and export automatically


Whole consumption


< Device capacity 3%


Noise


< 65 dB(A)


Environmental condition


Working temperature


-10 ¡æ- 45 ¡æ


Store the temperature


-20 ¡æ- 65 ¡æ


Relative humidity


< 90% (at 25 ¡æ)


Work pattern


Work continuously automatically


Interface of communication


Long-range RS485/RS232 / communication function of Ethernet (apolegamy) ; Go the intersection of location and the intersection of plane and the intersection of communication and software ‘ Apolegamy)


Operation reveals


LED controls the panel; The parameter is set up to run; Touch buttons to operate; Many parameters reveal


Reveal the precision


& plusmn of electric current; 5%FS


Expand ability


Of the same type to combine the machine directly, the quantity can be up to 10


Protection


Electric wire netting pass owe, press and electric wire netting lack looks, device pass flow, device overheated direct-flow bus bar pass, owe, press and automatic limit of overload shed and protect by mistake


Unit size W x D x H (mm)


800 x 800 x 2200


Install the requirement


The mounting point has not been shaken vigorously, without electric conduction and explosive dust, there is no gas of corrosivity, the slope is not greater than 5& deg;


Protect the grade


Ip43 (high to can be customized to protect the grade)


Second, resting has no definition of the work compensator synchronously

It does not have a work compensator (STATic synchronous COMpensator, abbreviates as STATCOM) synchronously that resting It is the flexibility – exchange the technology of transmission of electricity (Flexible ACTransmision System, is abbreviated as FACTS) If you can’t without work, last device,it power system last technology new developing direction as work on behalf of stages modern. It can send out or absorb the inactive power, and it can change to output in order to control the particular parameter in the power system; General, it is a kind of solid switch current transformer, when its input terminus is connected with the power or energy storage device, its output end can send out or absorb the controllable gaining merit and inactive power independently.

In the distribution network, it is (such as assaulting such as the electric arc furnace, subway and commutating load) to install STATCOM of the medium and small capacity in some special load Nearby can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the intersection of power and factor, uneven to overcome three-phase, dispel voltage, flash, become with voltage fluctuating, inhibiting particular time ‘ 3, 5, 7, 11Time) The harmonic wave is polluted etc..


Third, iNAS-S is resting not so brief introduction of as a work compensator synchronously

Series iNAS-S are too resting to have a work compensator with one pair of digital signal processors (DSP) synchronously It is a core, will connect in parallel on the electric wire netting changing the bridge type circuit of looks through the reactor, adopt the real-time data to gather technology and follow technology dynamically, is monitoring the voltage, electric current of electric wire netting and system constantly, adjust the systematic inactive power in fast and continuous compensation and at the same time, can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the power factor, overcome three phases unevenly and dispelling the voltage and flashing and turning into and fluctuating, inhibiting the harmonic wave from polluting etc. with the voltage.

Fourth, iNAS-S is too resting to have work compensator products advantage synchronously

Series iNAS-S are too resting to have work compensator that has already become and compensated the inactive power, improved the strong tool of electric energy quality synchronously. The key device IPM module of this technology, than GTO (the brilliant floodgate is in charge of) The component has quicker switch frequency, and shut off the capacity and already reached certain scale, so iNAS-S device has quicker response characteristics.

Have a lot of ripe measures that are solved as to the voltage quality problem at the time of the steady state; But to the dynamic electric energy quality problem, depend on the traditional one does not have work is compensated and straining the wave device conventionally can’t be solved effectively, because for example the voltage falls(sage) , the wave is welled up (surge) , voltage pulse (impulse) With instantaneous power failure (outage) This kind of electric energy quality problem duration is very short and changing quickly, and some electric energy quality problem is still accompanied by some even situations such as all meritorious losses,etc..


Series iNAS-S are too resting to have a work compensator on the basis of SVC device synchronously, have overcome SVC products because of presenting the permanent impedance characteristic, make when the voltage is low, unable to offer the necessary one to have no work to support, it is relatively weak to deal with the ability of the accident; And floor space large, too much SVC apt to initiate the intersection of system and the intersection of person who shake and drawback, to have the intersection of work and electric current it outputs to be can invariable in the very large the intersection of voltage and range of variation iNAS-S, can still offer the more strongly one to have no work to support when the voltage is low, and can arrive to holding the whole range from perception and regulate continuously, make it have no work to compensated and equivalent to with 1.4- 2 times of the capacity SVC; Because flexible high pressure of iNAS-S, can also reduce voltage transformer, divide number of times of switch connected into greatly, thus connect the number of times of the trouble in mitigation. In addition, iNAS-S can also inhibit the voltage from flashing and changing, raise the system temporarily the attitude stabilizes competences, combine our country’s conditions and existing technology, development resting to have work it compensates technology to be to solve the voltage of our country and stabilize the effective means of the problem synchronously, and the main direction of FACTS technical development.


Fifth, technological characteristic

The traditional one has no work to compensate the device to realize and have no work to compensate through regulating the electric capacity or inductance, though it is extensive to employ, it is slow that there are resonance, response time, can’t improve three phases unevenly, can’t offer a great deal of problems such as active power.

INAS-S is too resting to have a work compensator STATCOM synchronously, it no longer adopts high-capacity electric capacity, inductance device, but realize that there is not variety of work energy through the high-frequency switch of the electric electronic device of high-power, making has no work to compensate the step of a quality technically.

Series iNAS-S are too resting to have a work compensator synchronously

1.Respond to faster, have work that compensate the apparatus to can totally substitute the original low pressure

2.The voltage makes a variation stronger

3.Have chance with the apparatus, the range of running is wider

4.Can offer the active power within the specific limits

5.It is strong to inhibit harmonic ability once particularly

6.The electromagnetic noise is reduced notably

7.The power losses low, economize on electricity the result is prominent

8.Can solve the three-phase uneven problem

9.In not lasting ranging at apparatus can factor power bring up to and last 1.0,can & ldquo; Handle up & rdquo; Inactive power, compensate continuously, will not have produced the question of mending or undercompensation




Contacts: Manager Huang
Telephone: 86075533202178
Fax: 860755-33202179
Email:
Web site: http://www.inasmotion.com
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Module of Omron / C200H-AD003C200H-AD003

Contact: Miss Gong
Tel.: 020-38275155 18718405284 commercial QQ: 1290220871


C200H-AD001 digital quantity imports, exports and mixes the module
C200H-AD003 digital quantity imports the module
Power unit C200H-B7A12
C200H-B7A21 digital quantity imports the module
Power unit C200H-BAT09
C200H-CN222 digital quantity imports the module
C200H-CN222 digital quantity imports, exports and mixes the module
C200H-CN222 PLC
C200H-CN311 digital quantity imports the module
C200H-CN711 digital quantity imports, exports and mixes the module
C200H-CN711 digital quantity imports the module
C200H-CT001-V1 counts the module at a high speed
C200H-CT021 counts the module at a high speed
C200H-DA001 digital quantity imports the module
C200H-DA002 digital quantity imports the module
C200H-DA003 digital quantity imports the module
C200H-DA004 digital quantity imports the module
C200H-DAC01 digital quantity imports, exports and mixes the module
C200H-IA122 distributed I/O
C200H-IA221 digital quantity imports the module
C200H-IA222 distributed I/O
C200H-ID211 distributed I/O
C200H-ID212 distributed I/O
C200H-ID215 distributed I/O
C200H-ID216 distributed I/O
C200H-LK201-V1 digital quantity imports, exports and mixes the module
C200H-MAD01 analog quantity imports, exports and mixes the module
C200H-OC221 digital quantity imports, exports and mixes the module
C200H-OC222 digital quantity imports, exports and mixes the module
C200H-OC224 digital quantity imports, exports and mixes the module
C200H-OC225 digital quantity imports, exports and mixes the module
C200H-OD212 digital quantity imports, exports and mixes the module
C200H-OD215 digital quantity imports, exports and mixes the module
C200H-OD219 digital quantity imports, exports and mixes the module
C200H-OD219 digital quantity imports the module
C200H-PRO27-E digital quantity imports, exports and mixes the module
C200H-PS221 digital quantity imports, exports and mixes the module
C200H-RM201 digital quantity imports, exports and mixes the module
C200H-SP001 digital quantity imports, exports and mixes the module
C200H-TC001 function unit name
C200H-TC103 specialized unit I/O

Host computer CPU:
C200HE-CPU11-E C200HE-CPU32-E
C200HE-CPU42-E C200HG-CPU33-E
C200HG-CPU43-E C200HG-CPU53-E
C200HG-CPU63-E C200HX-CPU34-E
C200HX-CPU44-E C200HX-CPU54-E
C200HX-CPU64-E C200HX-CPU65-ZE
C200HX-CPU85-ZE
C200H-CPU01 C200H-CPU02 C200H-CPU03
C200H-CPU11 C200H-CPU21 C200H-CPU31
C200HS-CPU01 C200HS-CPU21 C200HS-CPU31
C200HE-CPU11 C200HE-CPU32 C200HE-CPU42
C200HG-CPU33 C200HG-CPU43 C200HG-CPU53
C200HE-CPU42 C200HX-CPU34 C200HX-CPU44
C200HG-CPU63 C200HG-CPU53 C200HX-CPU64
Unit C200HE-CPU11-E CPU
Unit C200HE-CPU42-E CPU
Unit C200HG-CPU43-E CPU
Unit C200HG-CPU63-E CPU
Unit C200HX-CPU44-E CPU
Unit C200HX-CPU64-E CPU

C200HW-BC031 digital quantity imports, exports and mixes the module
C200HW-BC051 PLC baseplate
C200HW-BC081-V1 digital quantity imports, exports and mixes the module
C200HW-BC081-V1 PLC baseplate
C200HW-BC101-V1 digital quantity imports, exports and mixes the module
C200HW-BC101-V1 PLC baseplate
C200HW-BC101-V1 PLC
C200HW-BI051 PLC baseplate
C200HW-BI081-V1 digital quantity imports, exports and mixes the module
C200HW-BI101-V1 digital quantity imports, exports and mixes the module
C200HW-BI101-V1 PLC baseplate
C200HW-COM06-EV1 communication adapter
C200HW-COM06-EV1 communication module
C200HW-ME04K digital quantity imports, exports and mixes the module
C200HW-ME16K digital quantity imports, exports and mixes the module
C200HW-NC213 digital quantity imports, exports and mixes the module
C200HW-PA204 digital quantity imports, exports and mixes the module
Power unit C200HW-PA204
C200HW-PA204 PLC
C200HW-PA204R switch power
C200HW-PA204S digital quantity imports, exports and mixes the module
C200HW-PA204S PLC



Contacts: Gong? ? ?
Telephone: 8602038275155
Fax: 86020-85524995
Email: 1710912369@qq.com
Web site:
Address: 218 #s ways of fine jade of big south street Lopa Nationality of Lopa Nationality of mountain area of Wuhan

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Fotek Taiwanese male genital’s bright SY-2D time relay SY-2D

Fotek Taiwan SY-2D time relay
Characteristic: Performance is steady, working voltage 12 or 24VAC/DC, 220VAC or 380VAC 50/60Hz (series TM are 90- 250VAC)
Export the relay, the work consumes 3VA max
Contact life-span 106 times of 20 X
H3-FK-M3 H3-TRD-30S H3-M H3- H2Y- H3Y- MY-
H5B-FK-M3 TM48-FK-M3 H5B-M TM48-M STPY-FK-M3
STPN-FK-M3 STPY-M STPN-TFN-H5B-TF H3-TF
TDVN-M TDVY-M TDFN-12H TDFY-12H H5T-4D G4Q-K1 G4Q-K2
SY-2D SY-3D SY-4D STP-2D STP-3D STP-4D H5M-4D
SK-2D SK-3D SK-4D PF085A P2CF-08 8PFA P3G-08


Contacts: Han SongKui
Telephone: 860755-29412192/91/90
Fax: 860755-29179602
Email: sales@sztianwei.net
Web site: http://www.sztianwei.net/
Address: Flat H of the 21st floor of the mansion of the centre of era on the way of well centre of sand of Baoan district of Shenzhen (upstairs of Industrial and Commercial Bank)

Tags:

Monday, November 30th, 2015 Power & control products No Comments

The person GV-21 and GV-H450 of Keyence Kean makes the suit GV-21 and GV-H450 up

Keyence Kean’s person GV-21 and GV-H450 suit.

Promise:
1.Packaging and fittings are complete;
2.The sequence number of the gift box is all the same as the sequence number of the products, a gift box corresponds to a product;
3.If buy a lot of one, can guarantee the sequence number continuously.

1 of week – take in week 5 working time, can deliver on the same day.
——————————————————
Take a picture in fact for GV-H450 warehouse stock in photo

















————————————————————————————

Take a picture in fact for GV-21 warehouse stock in photo.









—————————————————————————

GV-21 specification parameter


Type: GV-21

Amplifier type: Primary module

Power voltage: 10-30 VDC, pulses (P-P) : Largest 10%, the grade 2

The electric current is consumed: Standard: It is the 2200 mW largest ‘ In 30V 73.3mA biggest) ; The bar electricity of screen province: It is the 1700 mW largest ‘ In 30V 56.7mA biggest) ; The electricity of the whole province: It is the 1600 mW largest ‘ In 30V 53.3mA biggest)

Response time: 1.5ms; 3ms; 10ms; 20ms; 50ms

Control and export: NPN ( PNP) Collector open circuit x 2ch, the biggest 40 V( 30 V) DC largest 100 mA, residual voltage biggest 1 V

Control input: Purple line – -The laser is launched and stopped inputting; Pink line – -It presume passway switch over / if you can’t switch over, input /regularly inputting value (in accordance with presuming it doesn’t choose)

Ambient temperature: -10 to +55 degrees C (not freeze)

Relative humidity: 35 to 85% RH (not condense)

Able to bear the shaking: 10 to 55 Hz, 1.5 mm a pair of amplitude is in X, Y, Z direction, 2 hours for each direction

Material: Ago? ? ? Board (gather carbonic acid ester) ; The key is carried ‘ Resin) ; Cable (PVC)

Weight: About 110g

————————————————————————

GV-H450 specification parameter


Type: GV-H450 (remote type)

Light source: Can be seen the semi-conductive laser

Wavelength: 655 nm

FDA(CDRH) Part1040.10
Grade: Grade II
Export: 560¦Ì W

IEC 60825-1
Grade: Grade 2
Export: 560¦Ì W

Measure the distance: 160 to 450 mm

The revealing value of amplifier: 290 to 0 (the amplifier revealing value measuring the display of the distance while presuming as nor is consulted)

The amplifier reveals the range: 295 is expired by – 50

The standard measures skew: 3 mm

Some diameter: About 0.8 mm (measure the distance as 450 mm)

The indicator lamp of the state of running: Control and export ‘ Red LED) ; Launch the laser radiation indicator lamp ‘ Green LED) ; Other ‘ Green LED)

Protect the grade: IP67

Ambient temperature: -10 degrees C to +50 degrees of C (not freeze)

Relative humidity: 35 to 85% RH (not condense)

The environment is lighted: White heat mere ( 5,000lx)

The environment is lighted: Sunlight ( 10,000lx)

Able to bear the shaking: 10 to 55 Hz, 1.5 mm a pair of amplitude is in X, Y, Z direction, 2 hours for each direction

Material: Outer cover material (PBT) ; Reveal some ‘ Gather the sweet-smelling lipoprotein) ; Metal some ( SUS304) ; Lens cap ( Glass) ; Cable (PVC)

Cable length: 2 m

Weight: About 190g



Contacts: Manager Huang
Telephone: 86075533202178
Fax: 860755-33202179
Email:
Web site: http://www.inasmotion.com
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Sonar 3900 that the side is swept

Side of U.S.A.’s Model Klein3900 is swept the sonar is specially applied to a style of sweeping examining and maritime affairs search and rescue task of channel

Inland inshore the intersection of bank and portable figure of high-resolution pair incline and sweep the sonar system frequently.

The index of performance:

Ø Operating frequency: 445KHz 900KHz

Ø The angle of beam: Horizontal beam angle 0.21& deg; @445KHz / 0.21° @900KHz, vertical beam angle 40& deg;

Ø The pitch inclination of beam: Downward 5, 10, 15, 20, 25Degree, adjustable

Ø Sweep the measurement one: Divide 12, 25 ndash; 200m

Ø Maximum to sweep and examine the distance: 150m@445KHz, 50m@900KHz

Ø The working depth of water of amount: Mark, buy 200m ‘ But apolegamy)



Contacts: Lu ZeYan
Telephone: 86010-84827216
Fax: 86
Email: os_luzeya@163.com
Web site: http://www.oceanstar.org.cn/
Address: Entrance 1604 4, Building 4 of beautiful cube of north garden way of Chaoyang District of Beijing

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Resting to compensate the device INAS-S-400KVAR-04-38 synchronously

Type: iNAS-S-400kvar-04-380V


The unit compensates the capacity


400kvar


Exchange input


Specified voltage


380 x (1± 15%) V


Can apply to 6kV, 10kV and 35kV system through the voltage transformer


Specified frequency


50 x (1± 2%) Hz


Wiring way


Three-phase Line four


Technical indicator


The harmonic wave compensates the number of times


2-50 times


The harmonic wave compensating rate


In the specified capacity ¨R 95% ‘ ¨R 20%) of distortion rate of load


Power factor of the goal


Reach and presume the requirement within the range of capacity


Compensate the way


Rely mainly on there is no work to compensating, it is available to pay the function for the harmonic wave


The whole response time


< 5ms


Overload protection


Limit to the specified electric current and export automatically


Whole consumption


< Device capacity 3%


Noise


< 65 dB(A)


Environmental condition


Working temperature


-10 ¡æ- 45 ¡æ


Store the temperature


-20 ¡æ- 65 ¡æ


Relative humidity


< 90% (at 25 ¡æ)


Work pattern


Work continuously automatically


Interface of communication


Long-range RS485/RS232 / communication function of Ethernet (apolegamy) ; Go the intersection of location and the intersection of plane and the intersection of communication and software ‘ Apolegamy)


Operation reveals


LED controls the panel; The parameter is set up to run; Touch buttons to operate; Many parameters reveal


Reveal the precision


& plusmn of electric current; 5%FS


Expand ability


Of the same type to combine the machine directly, the quantity can be up to 10


Protection


Electric wire netting pass owe, press and electric wire netting lack looks, device pass flow, device overheated direct-flow bus bar pass, owe, press and automatic limit of overload shed and protect by mistake


Unit size W x D x H (mm)


800 x 800 x 2200


Install the requirement


The mounting point has not been shaken vigorously, without electric conduction and explosive dust, there is no gas of corrosivity, the slope is not greater than 5& deg;


Protect the grade


Ip43 (high to can be customized to protect the grade)


Second, resting has no definition of the work compensator synchronously

It does not have a work compensator (STATic synchronous COMpensator, abbreviates as STATCOM) synchronously that resting It is the flexibility – exchange the technology of transmission of electricity (Flexible ACTransmision System, is abbreviated as FACTS) Main for one of device,last device without work belonging to and connecting in parallel type,it power system last technology new developing direction as work on behalf of stages modern. It can send out or absorb the inactive power, and it can change to output in order to control the particular parameter in the power system; General, it is a kind of solid switch current transformer, when its input terminus is connected with the power or energy storage device, its output end can send out or absorb the controllable gaining merit and inactive power independently.

In the distribution network, it is (such as assaulting such as the electric arc furnace, subway and commutating load) to install STATCOM of the medium and small capacity in some special load Nearby can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the intersection of power and factor, uneven to overcome three-phase, dispel voltage, flash, become with voltage fluctuating, inhibiting particular time ‘ 3, 5, 7, 11Time) The harmonic wave is polluted etc..


Third, iNAS-S is resting not so brief introduction of as a work compensator synchronously

Series iNAS-S are too resting to have a work compensator with one pair of digital signal processors (DSP) synchronously It is a core, will connect in parallel on the electric wire netting changing the bridge type circuit of looks through the reactor, adopt the real-time data to gather technology and follow technology dynamically, is monitoring the voltage, electric current of electric wire netting and system constantly, adjust the systematic inactive power in fast and continuous compensation and at the same time, can be by improving the electric energy quality that load connects some places with public electric wire netting prominently, improve the power factor, overcome three phases unevenly and dispelling the voltage and flashing and turning into and fluctuating, inhibiting the harmonic wave from polluting etc. with the voltage.

Fourth, iNAS-S is too resting to have work compensator products advantage synchronously

Series iNAS-S are too resting to have work compensator that has already become and compensated the inactive power, improved the strong tool of electric energy quality synchronously. The key device IPM module of this technology, than GTO (the brilliant floodgate is in charge of) The component has quicker switch frequency, and shut off the capacity and already reached certain scale, so iNAS-S device has quicker response characteristics.

Have a lot of ripe measures that are solved as to the voltage quality problem at the time of the steady state; But to the dynamic electric energy quality problem, depend on the traditional one does not have work is compensated and straining the wave device conventionally can’t be solved effectively, because for example the voltage falls(sage) , the wave is welled up (surge) , voltage pulse (impulse) With instantaneous power failure (outage) This kind of electric energy quality problem duration is very short and changing quickly, and some electric energy quality problem is still accompanied by some even situations such as all meritorious losses,etc..


Series iNAS-S are too resting to have a work compensator on the basis of SVC device synchronously, have overcome SVC products because of presenting the permanent impedance characteristic, make when the voltage is low, unable to offer the necessary one to have no work to support, it is relatively weak to deal with the ability of the accident; And floor space large, too much SVC apt to initiate the intersection of system and the intersection of person who shake and drawback, to have the intersection of work and electric current it outputs to be can invariable in the very large the intersection of voltage and range of variation iNAS-S, can still offer the more strongly one to have no work to support when the voltage is low, and can arrive to holding the whole range from perception and regulate continuously, make it have no work to compensated and equivalent to with 1.4- 2 times of the capacity SVC; Because flexible high pressure of iNAS-S, can also reduce voltage transformer, divide number of times of switch connected into greatly, thus connect the number of times of the trouble in mitigation. In addition, iNAS-S can also inhibit the voltage from flashing and changing, raise the system temporarily the attitude stabilizes competences, combine our country’s conditions and existing technology, development resting to have work it compensates technology to be to solve the voltage of our country and stabilize the effective means of the problem synchronously, and the main direction of FACTS technical development.


Fifth, technological characteristic

The traditional one has no work to compensate the device to realize and have no work to compensate through regulating the electric capacity or inductance, though it is extensive to employ, it is slow that there are resonance, response time, can’t improve three phases unevenly, can’t offer a great deal of problems such as active power.

INAS-S is too resting to have a work compensator STATCOM synchronously, it no longer adopts high-capacity electric capacity, inductance device, but realize that there is not variety of work energy through the high-frequency switch of the electric electronic device of high-power, making has no work to compensate the step of a quality technically.

Series iNAS-S are too resting to have a work compensator synchronously

1.Respond to faster, have work that compensate the apparatus to can totally substitute the original low pressure

2.The voltage makes a variation stronger

3.Have chance with the apparatus, the range of running is wider

4.Can offer the active power within the specific limits

5.It is strong to inhibit harmonic ability once particularly

6.The electromagnetic noise is reduced notably

7.The power losses low, economize on electricity the result is prominent

8.Can solve the three-phase uneven problem

9.Compensate at range can factor power bring up to and last 1.0 at apparatus,can & ldquo; Handle up & rdquo; Inactive power, compensate continuously, will not have produced the question of mending or undercompensation




Contacts: Manager Huang
Telephone: 86075533202178
Fax: 860755-33202179
Email:
Web site: http://www.inasmotion.com
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea

Tags:

Monday, November 30th, 2015 Power & control products No Comments

Active electric wave filter INAS-A-300A-04-380V

If can’t turn on the video, please duplicate the following to chain to the browser, watch.

http://www.tudou.com/programs/view/mKy5o4I0pC8/

First, brief introduction of product and parameter

Type: iNAS-A-300A-04-380V


Power voltage of power supply


380 x (1± 15%) V


Can apply to 6kV, 10kV and 35kV system through the voltage transformer


Wiring way


Three-phase Line four


Power frequency of power supply


50 x (1± 2%) Hz


The unit strains the wave effectively

Electric current ability RMS


300A


Can strain except the harmonic number of times


2-50 times (dispel all or harmonic wave selecting the number of times)


The harmonic intensity is presumed


Can until harmonic wave go on, set for alone each time


The compensating rate of harmonic wave is *


¨R 95%


The whole response time


¨Q 5ms


Compensate the way


The harmonic wave compensates, not has work compensating or harmonic wave to have no work with mending


Switch frequency


10KHz


And the machine ability of running


N platform is parallel, propose 10 at most in speciality


The effective power is consumed


< 3% of specified capacity


Reveal the function

(user’s interface)


Power of the electric wire netting, power factor, every phase voltage electric current value, total distortion of the electric current, spectral picture, the wave form of the electric current reveals, supports total electric current value, wave filter and outputs revealing, way of running of the total electric current value and sets for, does node setting up, trouble information and running time inquiry


Protected mode


Electric wire netting pass owe, press and electric wire netting lack looks, device pass flow, device overheated direct-flow bus bar pass, owe, press and automatic limit of overload shed and protect by mistake


Cooling way


Force the cold wind


Noise


¨Q 65 dB(A)


Protect the grade


43 Ip (high to can be customized to protect the grade)


Install the size

W x D x H(mm)


1000 x 1000 x 2200


Only if can produce to dimension according to customer’s requirement


Weight Kg


650


Color


RAL7032 (can offer other colors on request)


Enter the line direction


Enterprising line /lay enter line


Environment


Indoor installation, propose, install height above sea level less than 2400m to be (high to take, lower, hold, use while being above sea level)


Ambient temperature


-20 ¡æ- 40 ¡æ


Communication


Long-range RS485/RS232 / communication function of Ethernet is available; Go the intersection of location and plane control software ‘ Apolegamy)


Second, active electric wave filter definition

Active electric wave filter (APF, Active Power Filter) Insert the electric wire netting in a parallel way, sample CT and monitor the load current in real time through high precision, convert to the signal that the digital processor can be read, pass a series of operation, by way of PWM modulation, control the module of central intellectual power to output the electric current and equal in harmonic weight, with opposite phase place, achieve and dispel the purpose that the harmonic wave purifies the electric wire netting.

Third, employ the target

Apparatus of all kinds of frequency conversion Unstable load Steel plant, coloured metallurgy, port machinery, point welder and electric arc furnace Chemical industry equipment High-accuracy automatic production line Various rectification apparatuses, commutating the voltage transformer All kinds of thermostatical apparatus, microwave oven Intermediate frequency stove Base station of the communication system Lighting load such as the computer, duplicator, lift, fluorescent lamp, electricity-saving lamp Incessant power ( UPS ) Air conditioner and central air conditioner of frequency conversion.

Fourth, overall advantage

1.Respond to ability fast

The advanced algorithm makes this product calculate the output of the next switch frequency within 100us time, so the response speed is less than 100us, can implement fast compensation in changing the comparatively frequent harmonic wave.

2.High-level dependability

Have exported the electric current, direct-flow the intersection of side and voltage, direct-flow side owe voltage, exchange the intersection of side and electric current, exchange the intersection of side and voltage, IGBT, die the intersection of district and protection and the intersection of IGBT and the intersection of person who protect and many kinds of the intersection of protection and function synthetically, guarantee to make the apparatus withdraw to run or protect system and apparatus reliably when the system or apparatus runs unusually.

3.High-capacity compensation ability

The compensation ability of the active wave filter is limited by IGBT capacity, difficult to compensate for high-capacity harmonic wave, product this accomplish, go on, combine the intersection of cupboard and dilatation unrestricted, make, become possible to the intersection of high capacity and harmonic compensation, and lowered costs greatly.

4.Simple working technique and structure

Easy to operate, only need to enter the system with load in parallel, does not need to carry on other operation. The internal structure is succinct, change flowing device into the module structure, it is apt to install and safeguard, after inserting the system, needing manual intervention can be operated normally.

5.High cost performance

Domesticize technology in an all-round way, respects such as the controller, current transformer and product structure,etc. have independent intellectual property rights.

6.Energy-saving and cost-reducing ability

Compare with passive wave filter but speech, active wave filter to strain wave by a harmonic thorough fare through set up, so active wave filter can economize to come down harmonic the intersection of distortion and the intersection of power and these part completely, therefore guarantee the user end gets the direct energy-conserving income.


Fifth, technology compare


Passive wave filter (PF)


Great Britain receives bodyguard’s active electric wave filter (APF)


Construct and the principle


The device composed of dull wave filter and high-pass filter compensates the harmonic wave


Have adopted the electric and electronic device to go on


The harmonic wave compensates the requirement


The compensation result that only has on harmonic wave some times, compensate the result badly while changing to the harmonic wave


Not limited to harmonic compensation some times, and carry on fast following compensating to the harmonic wave changed dynamically


Influence of impedance of electric wire netting


Compensate the characteristic and is affected greatly by impedance of electric wire netting


It is free of impedance of electric wire netting to compensate the characteristic


Harmonic phenomenon


Under the particular frequency, connect in parallel or connect the resonance in series between impedance and LC wave filter of electric wire netting, thus magnify the harmonic electric current or voltage.


Do not have harmonic phenomenon with the systematic electric wire netting


Energy-conserving result


No


Yes


Great Britain of Shenzhen receives bodyguard’s electric Co., Ltd.
Company’s website: http://www.apf.so or http://www.apf.net.cn orhttp://www.apf.org.cn
Contact: Mr. Huang
Mobile: 13751107723
Tel.: 0755-33202178-6351
Fax: 0755-33202179
Q Q : 12967689
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea



Contacts: Manager Huang
Telephone: 86075533202178
Fax: 860755-33202179
Email:
Web site: http://www.inasmotion.com
Address: 5 of the 3rd floor 2 of mere industrial area of Nanshan District Shahe West Road of Shenzhen tea

Tags:

Monday, November 30th, 2015 Power & control products No Comments