Archive for November, 2017

High-temperature high-pressure female screw thread discharge gate – forged steel female screw thread discharge gate Z11Y-320 of Model Z11Y-320

Brand [high-temperature high-pressure the intersection of female screw thread and discharge gate - forged steel female screw thread discharge gate of Model Z11Y-320 ] Ke, Confucianism of Shanghai: All use the material processing of forged piece and the discharge gate become is referred to as the forged steel discharge gate, the forged piece material is A105, F11, F5, 304, 304L, 316, 316L,etc.. The forged steel discharge gate often talked about at home usually means the small-bore forged steel discharge gate, the requirements range: DN10~DN50; Pressure range: National standard PN16 PN320, U.S.A. marks: Class 150 – 2500, Can adopt beauty to mark or dimension and produce processing in the country

High-temperature high-pressure female screw thread discharge gate use:

| | =High-temperature high-pressure female screw thread discharge gate =| | Applicable in Class 150 – 2500 , operating temperature -29- 425 ¡æ(carbon steel) Or – 29- 500 ¡æ(stainless steel) Pipe lines small-bore at,use for not blocking or putting through medium at pipe line,last different material, can be suitable for many kinds of mediums such as water, steam, oil, nitric acid, acetic acid, oxidative medium, urea separately. Shanghai the intersection of Confucianism and Ke valve brand employ more at the petroleum pipeline.

[The high-temperature high-pressure female screw thread discharge gate - performance parameter of main frame of forged steel female screw thread discharge gate of Model Z11Y-320 ]:

1.Use and transmit: Manually

2.Connect: Female screw thread

3.The structure of the valve body: Wedge damper.

4.The valve body is sealed: Soft to seal, hard and seal.

5.Service pressure: 0.6Mpa is less than or equal to 42Mpa

6.Make the requirements: DN15 is less than or equal to DN250

7.Applicable temperature: 0 ¡æ is less than or equal to 550 ¡æ

8.The main material of valve body: Stainless steel, cast steel, carbon steel, casting iron,etc..

9.Applicable working condition medium: Water, oil, steam,etc..

[High-temperature high-pressure female screw thread discharge gate - forged steel female screw thread discharge gate of Model Z11Y-320 ] makes the standard

Design specification: JB/T 7746, API602

Structure length: JB/T 7746, factory norm

Bear the socket / whorl: JB/T1751/GB7306, ANSI B16.11/B2.1

Test and examine: JB/T 9092, API598

Pressure – temperature: GB/T 9131, ANSI B16.34

Product identification: GB/T 12220, MSS SP25

Stock norm: JB/T 7928 GB API

{High-temperature high-pressure female screw thread discharge gate – forged steel female screw thread discharge gate of Model Z11Y-320 Product quality and after service ( Caveat vendor, one year guarantee the repair free of charge, change in one year in one year) The products offer service of maintaining all one’s life



Contacts: Manager Zheng
Telephone: 8613916671098
Fax: 86
Email: shrkfm@163.com
Web site: http://www.zhe-fm.com
Address: Little harbour industry Road, Lane 158 No. 2 of town of Kunshan of Songjiang district of Shanghai

Tags: ,

Sunday, November 26th, 2017 Power & control products No Comments

High-temperature high-pressure welding neck discharge gate – Model Z61H-160 Z61H-160

Valve Ke, Confucianism of Shanghai, high-temperature high-pressure welding neck to use for, block or put through the medium in the pipe line in high-pressure pipe line in discharge gate – Z61H-160 type, choose different materials, can be suitable for many kinds of mediums such as water, steam, oil, acid medium, oxidative medium, urea respectively. Used mainly in the pressure in Class600- 2500LB, operating temperature – 29- 425 ¡æ(carbon steel) Or – 29- 500 ¡æ(stainless steel) ,Use on high-temperature high-pressure pipe lines of industry such as the hydropower station, chemical industry, petroleum,etc..

[High-temperature high-pressure welding neck discharge gate - Z61H-160 type ] employs the norm:

1,Design and manufacture: E101

2,Structure length: E101

3,Welding neck is connected: 78DG  ANSI  B16. 25

4,Check sum is tested: E101 Item Model:

Use:

| | =High-temperature high-pressure female screw thread discharge gate =| | Applicable in Class 150 – 2500 , operating temperature -29- 425 ¡æ(carbon steel) Or – 29- 500 ¡æ(stainless steel) Pipe lines small-bore at,last medium at pipe line, be chosen by different materialed, can be suitable for many kinds of mediums such as water, steam, oil, nitric acid, acetic acid, oxidative medium, urea separately. Confucianism Ke valve brand employ more at the petroleum pipeline.

Carry out the standard ]

Design and manufacture: JB/T 7746

The end size of the whorl: GB 7306

Structure length: JB/T 7746

The pressure is the temperature: GB/T 9131

Test and test: JB/T 9092

[High-temperature high-pressure welding neck discharge gate - Z61H-160 type ] performance parameter of main frame:

1.Use and transmit: Manually, worm gear, it is pneumatic /electronically (be be brought manualed)

2.Connect: Female screw thread, external thread, flange, welding

3.The structure of the valve body: Single valve plate, one pair of valve plates.

4.The valve body is sealed: Soft to seal, hard and seal.

5.Service pressure: 0.6Mpa is less than or equal to 42Mpa

6.Make the requirements: DN15 is less than or equal to DN250

7.Applicable temperature: 0 ¡æ is less than or equal to 550 ¡æ

8.The main material of valve body: Stainless steel, cast steel, carbon steel, casting iron,etc..

9.Applicable working condition medium: Water, oil, steam,etc..

Z41H-320 forged steel flanged gate valve Q347H-320 forges the valve J61Y-320 forged steel of steel ball and closes at the valve Q641F-320 pneumatic forged steel valve Q941F-320 electronic forged steel valve Z43H-320 The forged steel dull and stereotyped discharge gate Y42H1500LB forged steel pressure reducing valve A47Y-320 forged steel safe valve ZJHF forged steel regulates the valve SG61H-320 forged steel filtering device Q347F-2500LB high Press forged steel valve Q347H-2500LB high-temperature forged steel valve JJ61Y-160 forged steel needle valve

The high-temperature high-pressure welding neck discharge gate – order notice of Model Z61H-160:

Please mark out when, order: Such as 1. The name of product, 2. Nominal size, 3. Service pressure, 4. Use the temperature 5. Use mediums, 6. Valve body material, 7. Address of delivering.

Second, if like the type that is selected by the design unit, please place an order with sales department of our company directly according to the type.

Third, it is explained that please come to electricity while ordering the products if there are special requirements

Fourth, the above is unidentified please send a telegram here or send the fax to consult, Confucianism of Shanghai the Ke ‘s welcomes your incoming telegram! Thanks!

The structural pattern is as follows:

1.The whole path or swedging

2.The structure length presses ANSI/ASME B16.10

3.The flange presses ANSI/ASME B16.5

4.Valve cover of self sealing

5.The bright pole takes the support

6.The self adjusting packing of both ends is pressed set;

7.Sealing falls in the body

8.Whole valve body Fran

9.The end of welding neck presses ANSI/ASME B16.25

10.The ring connects the valve cover shim of the valve body

11.With the bolt type valve covers, the whorl is sealed, welding valve covers of the winding type shim, or self sealing valve cover

High-temperature high-pressure welding neck discharge gate – Z61H-160 -type characteristic

Forged steel female screw thread discharge gate ( Steel female screw thread wedge discharge gate) Fluid resistance is small, open, close the required force moment minorly, can use on the ring network pipe line that the medium flows in two directions, just say the medium flows into unrestrictedly. When being wide-open, the erosion that the sealing surface receives the job medium is smaller than the stop valve. Physique is simple in architectural comparison, it is better to make manufacturability, the structure length is shorter.

Three kinds of valve covers design the form. The first kind is a bolt type valve cover, according to the valve that this kind of design form is designed, its valve body and valve cover are connected with the bolt nut, the winding type shim (316 inserts the soft graphite to make) Seal. The customer can also adopt the ferrule to connect while having special requirements. The second kind of design form is a valve cover of welded types, press the formal valve of this kind of design, the valve its valve body and valve cover use the screw joint, weld and seal completely. The customer can also be adopted completely and welded and connected while having special requirements. The third kind is a valve cover of self sealing, according to the valve that this kind of design form is designed, its valve body and valve cover use the screw joint, the dense ring of since the internal pressure is sealed.

High-temperature high-pressure welding neck discharge gate – Z61H-160 type makes the standard

Design specification: JB/T 7746, API602

Structure length: JB/T 7746, factory norm

Bear the socket / whorl: JB/T1751/GB7306, ANSI B16.11/B2.1

Test and examine: JB/T 9092, API598

Pressure – temperature: GB/T 9131, ANSI B16.34

Product identification: GB/T 12220, MSS SP25

Stock norm: JB/T 7928 GB API



Contacts: Manager Zheng
Telephone: 8613916671098
Fax: 86
Email: shrkfm@163.com
Web site: http://www.zhe-fm.com
Address: Little harbour industry Road, Lane 158 No. 2 of town of Kunshan of Songjiang district of Shanghai

Tags: ,

Sunday, November 26th, 2017 Power & control products No Comments

Sewage discharge monitors DATA-9201 in the line monitoring system, discharge of industrial wastes online

Sewage discharge is monitored in the line monitoring system, discharge of industrial wastes online
Sewage discharge monitors the demand of the situation of exhaust of enterprise sewage when it is real that the line monitoring system is satisfied with the supervision department, have solved the problem that blowdown enterprises do not pay even be in arrears with the fee of blowdown actively effectively. This system can realize two following goals:
Monitor blowdown quantity of supervising enterprises and water quality data in real time, can close the blowdown valve long-rangely if necessary.

Realize the intersection of blowdown and precharging, blowdown enterprise need, pay by credit card blowdown after the supervision department pays dues first.


The system forms:
The online monitoring system of sewage discharge is mainly made up of four following parts:
Control center: By the server, switchboard, IC card reader writer, control the software of platform to make up.
Communication network: 4G/GPRS/CDMA +INTERNET network; Non-contact type IC card.
Monitor terminal: The sewage discharge of IC card controls the terminal station DATA-9201.

Site plant: The intersection of COD and analysis meter, electromagnetic flowmeter, electrically operated valve, water quality more appearance ‘ On-demand is disposed) .


Function characteristic:
Gather the RS232/RS485 serial port signal or 4~20mA analog quantity signal that COD analysis meter, other water quality appearances, flow indicators outputted.
Gather reaching the location, closing to the bit status of the electrically operated valve.
Reveal sewage COD and instant, add up to real-time monitoring data such as discharge amount,etc. in situ.
Opening and closing of the electrically operated valve of remote control.
Can supplement the monitor terminal with money through the IC card, after the terminal expenses are consumed, close the electrically operated valve automatically, forbid blowdown; Users continue blowdown after paying the fees.
Support to presume the sewage COD upper value, COD monitoring data prescribe a time limit and turn off the valve automatically, forbid blowdown.
Support the network to supplement long-rangely with money.
When the container door of the monitor terminal is opened, report alert information immediately.
Support in situ, the long-range maintenance equipment.

Reserve the interface of the storage battery, can realize the deenergization warning function after inserting the storage battery.

The software interface is shown:




About key product:
The IC card control device DATA-7218 installs the key apparatus in the blowdown monitor terminal DATA-9201 of the IC card, possess multiple functions such as data acquisition, telecommunication, IC card precharging and valve control.



The control device DATA-7218 of the IC card possesses the following characteristics:
Hand in, D. C. supply will do.
Low power consumption is designed, support the solar energy to supply power.
It is abundant to gather the interface, all kinds of water quality analyzer / sensor, flow instrument of opposing connection.
High-capacity DO exports, avoids the auxiliary relay.
Support logic programming, local automatic control.
Support Mobile APP hairpin, supplement with money, sell the card ‘ With media reader corollary use of flat liter of bluetooth) .
Support the mobile phone APP wirelessly to debug, maintain.

Support the mobile phone APP to download the data.

The control device DATA-7218 technical parameter of the IC card is as follows:

Contact details:

Sewage discharge monitors more details to land Tangshan in the line monitoring system, discharge of industrial wastes online it is flat that the thematic websites of Internet of things in environment protecting mode rise: www.data86.cn

Contacts: Zhang Shijie
Telephone: 860315-7353612
Fax: 860315-7353612
Email: 1053441813@qq.com
Web site: http://www.data86.com
Address: The high and new technology development zone of Tangshan of Hebei celebrates a 37 number in the north

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

The oral question of plasma cutting slope is several kinds of situations SF130

There are oral slopes in plasma cutting, can only reduce inevitably. Classify specifically:
1,The section out of plumb is caused by cut the factoring, for example easy workout part has already been damaged, the atmospheric pressure is too large or insufficient, factors such as the cutting speed,etc., the probably plasma power goes wrong.
2,The ones that cut the straight line and left are not straight, this great majority are because the guide rail of the corresponding direction is not straight, and may cut the position change of setting up in the course, depend on detailed conditions.

Plasma arc cut utilize high-temperature heat of plasma arc make the intersection of work piece and the intersection of cut-out and metal part of melt ‘ And evaporate) ,And borrow at a high speed,etc. the ionic momentum gets rid of the molten metal in order to form and cuts a oral processing method.
Industrial use
Plasma cutting can cut the metal different to cut of various oxygen-cut while cooperating with different job gas, especially to the nonferrous metals ‘ Stainless steel, aluminium, copper, titanium, nickel) It is better to cut the result; Its major advantage lies in when cutting the metal not big of thickness, plasma cutting is fast, especially while cutting the sheet metal of ordinary carbon steel, the intersection of speed and reachable the intersection of oxygen cutting and 5~6, the intersection of cut surface and bright and clean, the intersection of hot deformation and little, fewer heat affected zone of law.
The plasma cut-off machine is applied to the car extensively, all trades and professions such as locomotive, pressure vessel, chemical machinery, nuclear industry, common machinery, engineering machinery, steel construction, vessel,etc..

Gas of job
Plasma cutting develops into the gas of adoptable job (the gas of job is the conducting medium of the plasma arc at present, take the hot body, get rid of the molten metal in the cut-out at the same time) There is obvious influence on cut characteristic and cutting the quality, speed. The commonly used plasma arc job gas is argon, hydrogen, nitrogen, oxygen, air, vapor and some mist.

Cut the norm
Various plasma arcs cut the technological parameters, direct influence cuts the stability, cut quality and result of the course. Mainly cut the norm to sketch as follows:

Idler voltage and arc column voltage
Unless plasma cutting power, it must have high idler voltage enough,could arc ignitions easy and make plasma arc not burnt steadily. The idler voltage is generally 120-600V, half that and the arc column voltage is generally the idler voltage. Improve the arc column voltage, can increase the power of the plasma arc obviously, therefore can raise the cutting speed and cut the metal planking of larger thickness. The arc column voltage often reaches by regulating the gas flow and amount of shrinking while strengthening electrodes, but the arc column voltage can’t exceed 65% of the idler voltage, otherwise will stablize plasma arc no.

Cut the electric current
Can improve the power of the plasma arc while increasing and cutting the electric current, but it is limited by permissible current of maximum, otherwise will make the plasma arc column thicken, the slot width increase, the electrode life-span drop.

Gas flow
It is stronger to increase gas flow and not only can improve the arc column voltage, but also can strengthen the compressed function on the arc column and make the energy of plasma arc more centralizedly, spray strength, therefore can improve cutting speed and quality. But gas flow is too big, will make the arc column shorten instead, heat increases losses, make it subside not to cut ability, until make, cut course to be unable to go on normally.

Amount of shrinking in the electrode
The so-called inner amount of shrinking means the electrode gets in the distance of the end of the cutting tip, the appropriate distance can make the electric arc get good compression in the cutting tip, obtain energy in the centralized plasma arc with high temperature and carry on valid cut. From too big too small, will enable electrode serious burning loss, cutting tip burning off and cut ability to drop. The inner amount of shrinking generally fetches 8-11mm.

The cutting tip height
The cutting tip highly refers to the distances of the surface of work piece to cut of terminal surface of cutting tip. This distance is generally 4~10mm. It is like amount of shrinking in the electrode, the distance does not give full play to the cut efficiency of the plasma arc until being suitable, will make, cut efficiency and cut quality reduction or enable cutting tip burning off.

Cutting speed
The compressed effect of the above-mentioned various factor direct influence plasma arc, that is to influence temperature and energy density of the plasma arc, and high temperature, high-energy of plasma arc determine cutting speed, so various factors of the above relate to cutting speed. On the premise of guaranteeing to cut quality, the cutting speed of improvement that should be possible. This not only boosts productivity but also can reduce the deformation amount of cutting the part and hot range of influence of the slot district. If cutting speed improper, opposite result its, will make it increase not to glue the dreg, cut the quality reduction.

Cutting process
The plasma cutting process is besides general form, the form derived out has water pressure that draws back plasma cutting,etc.. The most frequently used method is general plasma cutting and air plasma cutting.

Generally cut
General plasma cutting does not use the protecting gas, the gas of job and cutting the gas to squirt from the same spray nozzle. At the arc ignition, squirt stingy to shed ion gas as the ionization medium; Cut, squirt atmosphere, shed gas in order to exclude from melting the metal at the same time.

The air cuts
It is angry to generally use compressed air as ion the plasma cutting of air, this kind of method cuts the low cost, the source of source of the gas is convenient. The compressed air heats in the electric arc, decomposing and ionization, the oxygen produced cuts through the metal and produces the chemical exothermal reaction, accelerate the cutting speed. The heat content value of air plasma body of abundant ionization is high, therefore the energy of the electric arc is great, it is fast to cut.

Contacts: Mr. Wu
Telephone: 860512-55272882
Fax: 86
Email: 3588722984@qq.com
Web site:
Address:

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

HONEYWELL PWB51402645-200

1. As TCP server, wait for the Connection request of the server of the data in the designated TCP port after the power up of the converter, when the server of the data is needing with the converter communication,
Ask to set up TCP to connect to the monitoring port of the converter, after connection establishment, the server of the data can be to the transmission data of the converter at any time, the converter can send the data to the server of the data at any time too,
After finishing the designated communication, data server can demand to disconnect the connection voluntarily, otherwise connect keeping all the time.
2. As TCP customer end, will ask to connect to the server voluntarily at the time of the power up of the converter, until TCP connection establishment, and connect and set up keeping all the time, after connection establishment, the server of the data can be to the transmission data of the converter at any time, the converter can send the data to the server of the data at any time too.
3. There are two kinds of UDP ways:
Look on as C2000 work in ” UDP normal ” At the time of the mode, the data that C2000 will respond all IP addresses and ports and send over, and send the data returning to for the last time to inquire about IP address and port asked for it.
Look on as C2000 work in ” UDP Appointed ” At the mode, it the intersection of receiving only and designated IP address and port send data that come over, and send the data returning to designated IP address and port.
b)The application software can use three ways and converter news reports:
1. The fictitious serial port supervisory routine that developed through our company, reaches the reorientation of network data the fictitious serial port, then read data fetch from the fictitious serial port;
2. Controlling part EDSockServer.ocx (or the dynamic storehouse EDSockServer.dll) developed with our company ;
3. Use Socket to carry on the communication.
System CPU 32 – bit ARM
RAM 64KB
Flash 256KB
LAN speed 10M/100Mpbs
Interface RJ45
Serial port Each RS-232
The serial port quantity One
Signal RS-232: TXD, RXD, RTS, CTS, GND
The communication parameter intended effect None of the serial port, Even, Odd, MARK, SPACE
Data bit 6, 7, 8
Stop bit 1, 2
The flowrate controls RTS/CTS, XON/XOFF, None
Speed 300bps~115200bps
IO digital interface DI dry joints of No. 16 input
DI has protected and pressed less than 240V, the excessive load is smaller than 80mA
DO normal open type electrical relays of No. 16 exported
DO capacity 2A/30V DC, 1A/125V AC
Software characteristic agreement ARP, IP, ICMP, TCP, UDP, DHCP, HTTP
Mode of operation TCP Server, UDP, TCP Client, fictitious serial port, point-to-point connection
Set up C2000 and set up procedure, Web browser, dynamic storehouse of arrangement
Offer the software Software of fictitious serial port, C2000 sets up the procedure, debugging tool of serial port, the network sets up the example codes of controlling part of procedure, EDSockServer.OCX, EDSockServer.DLL dynamic storehouse, dynamic storehouse of arrangement and VB, VC, BC, Delphi
Drive and support 7 32 persons of Windows 98 / ME/2000/XP/2003/Vista/Windows
Power demand Power specification 9~24VDC (recommend 12VDC)
Job electric current & lt; 500mA( 12VDC)

Environment Operating temperature -From 25 ¡æ to 85 ¡æ

Some stock of eastern Ward scientific and technological Co., Ltd. of Dalian is as follows:
Clip of Siemens 6ES5498-1AA51
Clip of Siemens 6GK1 500-0AB00
Clip of Siemens 6ES7 323-1BL00-0AA0
Clip of Siemens 6ES7 322-1HH01-0AA0
Terminal device 6ES5760-1AA11
Card 6ES5525-3UA21 of the communication
Digital input card 6ES5451-7LA11
Memory 6ES5-375-1LA61
Clip of Siemens 6ES5 951-7LB21
Clip of Siemens 6ES5 931-8MD11
Clip of Siemens 6ES5 700-8MA11
Clip of Siemens Clip of 6ES5 095-8MB03 Siemens 6ES5498-1AA51
Clip of Siemens 6GK1 500-0AB00
Clip of Siemens 6ES7 323-1BL00-0AA0
Clip of Siemens 6ES7 322-1HH01-0AA0
Terminal device 6ES5760-1AA11
Card 6ES5525-3UA21 of the communication
Digital input card 6ES5451-7LA11
Memory 6ES5-375-1LA61
Clip of Siemens 6ES5 951-7LB21
Clip of Siemens 6ES5 931-8MD11
Clip of Siemens 6ES5 700-8MA11
Clip of Siemens 6ES5 095-8MB03
Eastern Ward scientific and technological Co., Ltd. of Dalian
Miss Lu: 13478529683
0411-82772579-813



Contacts: Miss Lu
Telephone: 860411-82772579-813
Fax: 860411-82772576
Email: sales_2@dfhdtech.com.cn
Web site: http://www.dfhdtech.com.cn
Address: Garden 1-4-4-2 of the ripples scene in Liaoning Province Dalian Zhongshan district

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

Elastic seat soft sealed discharge gate – Z41X-150LB is beautiful to mark the soft sealed discharge gate Z41X-150LB

About products: Shanghai Confucianism elastic flat soft sealed discharge gate – Z41X-150LB beautiful to mark soft sealed the intersection of discharge gate and famous professional manufacturer in Ke, this valve of body materials mainly adopt stainless steel, gray iron or ductile iron the discharge gate that makes into is called: [To it opens and closes piece to be damper elastic the intersection of seat and soft sealed beautiful to mark soft sealed discharge gate discharge gate - Z41X-150LB ], the movement direction of the damper is transverse to fluid direction, the discharge gate can only be closed wide-openly and completely, can’t regulate and reduce expenditure. There are two to seal the surface dampers, two sealing surfaces of plate valve of floodgate of most frequently used mode form the Tenneco, Tenneco angle type valve. In order to improve its craft, ones that remedied the angle of sealing surface and produced in the course of processing leant towards difference, this kind of damper is named the elastic damper. Used in the running water extensively, as regulating and damming the device to use on body pipelines such as sewage, architecture, petroleum, chemical industry, food, medicine, light textile, electricity, vessel, metallurgy, energy system,etc..

5.1,The elastic seat seals the discharge gate

Z41X soft sealed discharge gate. . Soft sealed discharge gate of Z41X flange. . Z41X-10 casting iron soft sealed discharge gate. . Z41X-16C cast steel soft sealed discharge gate. . Soft sealed discharge gate of Z43F-16C plateform. . Z41X water uses the soft sealed discharge gate. . Soft sealed discharge gate of Z41X bright pole. . Soft sealed discharge gate of Z45X dark pole. . Z541X manually soft sealed discharge gate

About products: Elastic seat soft sealed discharge gate – Z41X-150LB beautiful to it marks soft sealed discharge gates to be whether one adopt soft to seal discharge gate that material made, call that the soft sealed discharge gate. Our company to introduce the intersection of Europe and Hi-Tech rubber and the intersection of valve and the intersection of elasticity and the intersection of flat and soft producer to seal discharge gate manufacturing technology produce, this technology has overcome the defect of wearing out and getting rusty etc. of sealing bad, elastic fatique, rubber of the general discharge gate, can be used in the running water extensively, as regulating and damming the device to use on fluid pipelines such as sewage, architecture, petroleum, chemical industry, food, medicine, light textile, electricity, vessel, metallurgy, energy system,etc.. Have switch to be light and handy sealing reliable elastic the intersection of memory and good and prominent advantage of having long performance life etc..

Elastic seat soft sealed discharge gate – Z41X-150LB is beautiful to mark the basic demand of soft sealed discharge gate

The discharge gate should be made up partly by valve body, valve stem, valve cover, axle cap, valve, hand wheel, seal ring, bolt, nut,etc. at least.

( 1) The main spare part material of discharge gate is as follows:

Valve body, valve cover, axle cap: Ductile iron;

( 2) Valve plate material: The skeleton is cast wholly of ductile iron, the internal and external surfaces of the skeleton adopt the sulfuration forming craft of the kilowatt meter and wrap up rubbers completely;

( 3) Valve stem: Stainless steel;

( 4) Seal ring: Nitrile rubber;

( 5) Hand wheel: HT250 gray iron;

( 6) Spare parts such as the bolt nut,etc.: Stainless steel.

The valve should meet bearing requirements put forward in the design drawing.

The supplier should offer the life time, manufacturer and national examining report of the nitrile rubber, should offer some drag coefficient of the valve.

Sewage treatment process and scheme

1,Domestic sewage

( 1) Domestic sewage treatment process and scheme

( 2) Deal with and reach GB8978- 1996 ” comprehensive emission standards of sewage ” are after the Grade three

Elastic seat soft sealed discharge gate – Z41X-150LB is beautiful to mark the soft sealed discharge gate ” Mainly design and use the parameter ” :

” Main design and using parameters” :

Transmission form: Electronically, hand wheel, worm gear, bevel gear, pneumatically (bring manually) .

Driving mode: electric, hand wheel, worm gear, bevel gear, pneumatic (manual) .

Connection mode: Female screw thread, external thread, flange, to clamp type, weld, the card ºH¡¢’s cutting ferrule.

Connection mode: internal thread, external thread, flange, clamp, welding, fast loading, card sets.

Structural features: Bright pole, dark pole, wedge damper, parallel type damper, elastic damper.

Structure features: stem, non-rising stem, wedge type gate, parallel disc and flexible disc.

Sealed material: Soft to seal, hard and seal.

Packing material: soft seal and hard seal.

Make the requirements: DN15 is less than or equal to DN800.

Manufacturing caliber: DN15 DN800 or less.

Applicable temperature: 0 ¡æ is less than or equal to 550 ¡æ.

The range of the temperature: 0 ¡æ550 ¡æ or less.

Applicable pressure: 0.1Mpa is less than or equal to 6.4Mpa (vltrahigh voltage can be made to order) .

Apply pressure: 0.1 Mpa to 6.4 Mpa or less (ultra-high voltage can be customized) .

Valve body material: Stainless steel (304) , cast steel (WCB) , chrome molybdenum steel (WC6) , casting iron (HT2000) When.

Body material: stainless steel (304) ,cast steel, chrome molybdenum steel (WCB) (WC6) ,iron (HT2000) ,etc.

Applicable medium: Water, oil, steam, all kinds of acid, corrosivity medium,etc..

Applicable medium: water, oil, steam, acid, corrosive medium and so on.

The discharge gate can be divided into according to the structure of the valve stem:    

A bright pole discharge gate: The valve stem nut is on the valve cover or support, while opening and closing the damper, by rotating the valve stem nut to realize the rise or fall of the valve stem. The lubricated and favorable to valve stem structure, open and close intensity to be obvious, adopted extensively.    

2 dark poles of discharge gates: The valve stem nut keeps in touch with the medium directly in vivo in the valve. While opening and closing the damper, realize by rotating the valve stem. Such structural advantage is: The height of the discharge gate always maitains unchanged, so it is small to install the space, is suitable for the heavy-calibre or right to install the res. discharge gate of space. This kind of structure should be equipped with and opened and closed the indicating device, in order to point out and opens and closes the intensity. Such structural shortcoming is: The valve stem whorl is not only unable to lubricate, but also accept directly mediums are corroded, it is apt to damage.

   

Main difference:

1.The lifting handle of the dark pole flanged gate valve is only rotating but bes supreme and leaves and moves, it is only a pole to be exposed, its nut is fixed on damper, promote the damper by rotation of the screw bolt, there is no visible lane; The lifting handle of the bright pole flanged gate valve is exposed, the nut sticks to the hand wheel closely and stationary (too non-rotating to move axially either) ,Promote the damper by rotatory screw bolt, screw bolt and damper have relative rotary motion only and there is no relative axial displacement, the appearance, in order to have door shape supports.

2 dark poles of valves can not see guide screw, seeing threaded bolt of and bright pole.

   

3.The steering wheel while turning on or off of the dark pole valve links the relatively aplanetic one together with the valve stem, it rotates through the valve stem on the fixed point to drive the valve clack to promote up and the lower floodgate to finish opening and closing. The bright pole valve transmits to promote or lift down the valve clack through the whorl of the valve stem and steering wheel.

   

Say it is that a bright pole valve is that the valve clack moves up and down connecting with the valve stem together a bit more simply, the steering wheel is on the fixed point all the time.

Shanghai the intersection of Confucianism and Ke valve brand engaged in the valve design for many years =Manufacture =Sell, elastic seat soft sealed discharge gate – Z41X-150LB beautiful to mark soft sealed the intersection of discharge gate and product quality, get domestic and foreign customer, use, prove product quantity reliability on the spot for many years. Our company provides for product quality ‘ The third quality is chartered) After-sale service



Contacts: Manager Zheng
Telephone: 8613916671098
Fax: 86
Email: shrkfm@163.com
Web site: http://www.zhe-fm.com
Address: Little harbour industry Road, Lane 158 No. 2 of town of Kunshan of Songjiang district of Shanghai

Tags: ,

Sunday, November 26th, 2017 Power & control products No Comments

The flue gas discharges serial monitoring system, online monitoring equipment DATA-9201 of flue gas

The flue gas discharges serial monitoring system, online monitoring equipment of flue gas


It is the important means of supervising to the flue gas pollution control state of the food and beverage enterprise that the flue gas discharges the serial monitoring system, can carry on on-line monitoring to concentration of emission of soot, purifier and air blower running status of the food and beverage enterprise, have offered true, effective and overall supervision information for department in environment protecting mode.


The system forms:
The flue gas discharges the serial monitoring system and is mainly formed by three parts:
Sensor: Soot density probe, working condition sensor.
Monitor terminal: Soot monitor terminal DATA-7401, gather the sensor data and pass 4G/3G/2G or wired network transport data.
Control the platform: On-line monitoring platform automatic reception of soot, storing, revealing the monitoring data, the data exceed standard, autoalarm at the time of Unit Exception.


Function characteristic:
( 1) The data are gathered automatically, support departments and enterprises in environment protecting mode of provinces, cities and autonomous regions to be polycentric and convey.
( 2) The soot density of real-time display, purifying the equipment status, calling the police, fault alarm that and can exceed standard automatically, facilitate environmental protection
Guardian Semen Caesalpiniae controls the blowdown situation hour.
( 3) Support breakpoint transmission, the monitoring data can be buffered here when the network cuts off, report the data after the event immediately after the network resumes.
( 4) Raise the centralized supervision efficiency to the dispersing food and beverage enterprise, reduce the pressures of personnel of supervision department.
( 5) Supervise through the informationization, contribute to improving the consciousness of responsible host in environment protecting mode of enterprises, implement the responsibility in environment protecting mode conscientiously.
( 6) Transport and link and manage the informationization, but manage apparatus and maintain and is traced back to the apparatus failuer cause long-rangely.
( 7) The food and beverage enterprise can look over the blowdown state to this enterprise at any time, and carry on comparison and analysis, offer the decision basis for blowdown overall control of enterprises.


Brief introduction of soot monitor terminal:
The soot monitor terminal DATA-7401 is that one has data / picture to gather, all around ‘smart’ products such as colored touchscreen revealing, telecommunication of high-capacity data storage, 4G/3G/2G / Ethernet of 5 inches,etc..

( 1) Characteristic of the products
Deal with at a high speed, the not smooth card machine.
Adopt ARM processor (Cortex? -A8 high-speed kernel) ,Frequency that 800MHz runs;
Technical grade 256M DDR3 memory.
Embedded WindowsCE6.0 operating system
Support the user’s needs to customize;
Secondary development of the support functionality.
Colored liquid crystal display of high definition
Screen size: 5 inches;
Definition: 800* 480 picture element.
Data storage of more than 10 years
Mark and mix 256M NandFLASH, can expand SD/TF card to store;
The data / picture circulate storing, power down and does not lose;
Support U a automatic backup.
Debug, safeguard simply, get rid of the computer reliance correctly.
The on-the-spot touch-sensitive screen sets up, revises the parameter;
The mobile phone APP bluetooth is wireless to have joining, staging;
The control center has joining, staging long-rangely.

Support the city power, solar energy to supply power
10~30V wide-range supplies power;
Adopt multiple lightning protection, isolate and protect.
( 2) Technical parameter


( 3) Install the way


Contact details:




The flue gas discharges serial monitoring system, more details of the online monitoring equipment of flue gas and lands Tangshan it is flat that the thematic websites of Internet of things in environment protecting mode rise: www.data86.cn

Contacts: Zhang Shijie
Telephone: 860315-7353612
Fax: 860315-7353612
Email: 1053441813@qq.com
Web site: http://www.data86.com
Address: The high and new technology development zone of Tangshan of Hebei celebrates a 37 number in the north

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

Paying the fees machine hjjl017 by oneself of supervising system of unattended operation vehicle

” nobody ” It is a hotter concept recently, nowadays this market is very extensive, receive the extensive concern inside and outside the trade. Except front-stage the intersection of time comparison and fire have sense pay, recently, under technical drive such as AI, the unattended operation parks and follows too.

The constant enlargement of the automobile market brings huge presure to car parking, move popularization paying and solve this problem to a certain extent, it is intelligent to promote the car parking, the seamless of the two merges and lets the tradition park in the industry magnificently to make the transition. Whether the car parking of the unattended operation is a direction of trade development in the future.

During not can fit rich on the 16thing, royal gold unite the electron, exhibit the global solution of car parking, have reflected the facility brought in unmanned car parking.

Having saved the cost of manpower in the unmanned car parking, its advantage is particularly obvious in the car parking of large scale business, but this is not a main advantage of this system definitely. Generally speaking, it is on duty to only arrange a person in the medium-sized car parking, need three people each day. Though the advantage is non-obvious in short term, if things go on like this, the unmanned car parking is more worthwhile. Certainly, the cost of manpower is only only a respect, can lead the change of the car parking in the unmanned car parking, this should the most crucial, should intelligence park the intersection of application system and direction enterprise struggle hard too.

Nowadays, nobody parks and begins to capture each market, include such companies as the victory is being united along, blue card, royal gold garrison in this market in succession, with the constant car recoverable amount that pours into, increases day by day and parking in the rare contradiction of the capital, nobody parks and welcomes the preferably opportunity of development.

Even so, each enterprise should notice. Royal gold unites the scientific and technological general manager to think, if really want to be a good nobody parking, should set about from three respects hard:

Technology must be complete on each detail, no matter links such as paying, number plate discerning or employing, depositing, remote, talkbacking,etc., each detail is perfect, especially in discerning, paying, even there is very small error ratio, lead to the fact unattended operation car parking very much difficult to popularize.

Managed, managed under a line in the past, mainly depended on manpower. System. The management, unwatched on the line that the staging reaches nowadays, these need to be ready on software and hardware, and adapt to this kind of change.

Should fully understand users are used to, and then do and solve the scheme wholly, try hard to respect the Off-The-Shelf user’s habit, users are used to guiding, but it is totally impossible to change in a short time, should combine well on the wiring harness, under the line, let the old aunts use, this is a thing that should be done at present.

” Internet + parking ” Concept appear more than two year, disappearing now, is it nowadays nobody rise again. In this tide, the insider should not regard it as the gag propagandized, but really implement the car parking of the unattended operation to the effect, bring better experience to user.



Contacts: Pan Sheng
Telephone: 860755-29995734
Fax: 86
Email: 2943414114@qq.com
Web site: http://www.icash.wang
Address:

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

Environmental protection counts and adopts the appearance, data acquisition to transmit the appearance DATA-6312

Environmental protection counts and adopts the appearance, data acquisition to transmit the appearance

Environmental protection counts and adopts the appearance and is used particularly in the environmental test and data acquisition, memory and transmission equipment of on-line monitoring of the pollution source, gather the passway after allocating abundant analog quantity, switch quantity and serial port digital quantity, support 4G, NB-IoT, GPRS, CDMA many kinds of communication mode, environmental protection count adopt appearance, suitable for the intersection of country and accuse of, the intersection of province and accuse of, the intersection of city and the intersection of person who accuse of and the intersection of environmental protection and online monitoring system all kinds of.

Typical application:

Function characteristic:
1,The interface type is various
Incoming channel of analog quantity (AI) : Gather all kinds of sensor 4-20mA, 0-20mA, 0-5V outcoming signal.
Incoming channel (DI) of the switch amount : Gather the working condition of different pollution control apparatuses.
Serial port (RS232/RS485) : Gather all kinds of water quality, gas on-line analysis instrument output data.
Control duct of the apparatus (DO) : Support to control apparatuses such as the valve, gate, alarm equipment,etc..
2,High-capacity data storage
The data are stored reliably in more than 1 year, the power down is not lost;
Support deriving, backup of the historical data.
3,It is abundant in content to reveal
Monitor the real time data of the parameter, mean value, Japan’s mean value and monthly mean value reveal hour;
Total amount, Japan’s total amount and monthly total amount reveal etc. hour of pollutant.
4,The communication mode is flexible
Communication modes such as 4G, NB-IoT, GPRS, CDMA, RJ45,etc. are available;
Support polycentric communication, realize Environmental Protection Agency and enterprise at all levels look over the data synchronously;
At the time of the congestion of network, the data are reissued automatically, guarantee the monitoring data are not lacked.
5,Intellectual prewarning, calling the police
Monitor parameter overrunning, automatic prewarning of data exception;
Sensor trouble, unusual autoalarm of power supply.
6,It is debugged, maintained that the mobile phone is wireless
Support the wireless communication of bluetooth;
Can set up the parameter, debugging equipment through the mobile phone.
7,The environment has a good adaptability
The operating temperature range is wide, resist the severe cold, high temperature resistant;

Reliability is high, average accident-free run time is greater than or equal to 25000h.


Technical parameter:

Some compatible environmental protection instrument producers:
Kazakhstan wishes ‘ U.S.A.) MANTA (U.S.A.) Environmental protection of the beginning It is reached that the department is auspicious

The spot light is scientific and technological Environmental protection of space flight Surround the department in Qingdao Happy gentle environment


Connect the way with the environment monitoring platform:
<>
Offer the software of communication service
Open the database

OPC interface


The software of forming a complete set availably:

Contact details:


Environmental protection counts and adopts the appearance, data acquisition to transmit more details of the appearance and land Tangshan it is flat that the thematic websites of Internet of things in environment protecting mode rise: www.data86.cn

Contacts: Zhang Shijie
Telephone: 860315-7353612
Fax: 860315-7353612
Email: 1053441813@qq.com
Web site: http://www.data86.com
Address: Tangshan of Hebei? ? ? The high and new technology development zone celebrates a 37 number in the north

Tags:

Sunday, November 26th, 2017 Power & control products No Comments

Z41W-16P stainless steel bright pole discharge gate – Z45W-16P stainless steel dark pole discharge gate Z41W-16P

Z41W-16P series type ” the the intersection of Z41W-16P and the intersection of stainless steel and bright the intersection of pole and discharge gate – the intersection of Z45W-16P and the intersection of stainless steel and dark the intersection of pole and discharge gate ” valve Ke, Confucianism of Shanghai: Cultured quality, science and technology are made. High-quality adoption wholly (304, 304L, 316, 316L) Wait for the stainless steel, make out. The valve seat can be processed according to customer’s request: The tungsten carbide is sealed or the carbide is sealed. It is used mainly in: On pipe lines such as the petroleum, chemical industry, liquefied gas station, food, pharmacy, urban construction, building, water supply and drainage, water treatment,etc.. Play a ending or regulating role in the pipeline system.

Z41W-16P stainless steel bright pole discharge gate – Z45W-16P stainless steel dark pole discharge gate advantage and shortcoming

Which are the advantage of the discharge gate:

(1) Fluid resistance is small because the medium passway is straight through within the valve body of the discharge gate, the medium does not change its flow direction while flowing through the discharge gate, so fluid resistance is small.

(2) It is low to open and close the force moment, open and close and relatively save effort because the movement direction of damper is transverse to medium flow direction, compare with stop valve when the discharge gate is opened and closed, the opening and closing of discharge gate relatively saves effort.

(3) The medium flow direction is unrestricted, do not disturb and flow, not reduce the pressure medium and can flow through from the arbitrary direction of both sides of the discharge gate, can achieve the goal of using. In the pipe line where the flow direction suitable for the medium may change.

(4) The structure length is shorter because the damper of the discharge gate is vertical and located in valve body, and the stop valve valve clack is that the level is located in valve body, therefore the stop valve of the structural proportion of length is short.

(5) The sealing surface is eroded minorly while sealing of good performance and wide-openly.

(6) When being wide-open, the erosion that the sealing surface receives the job medium is smaller than the stop valve.

(7) Bodily form is simpler, it is better to cast manufacturability, the applicable scope is wide.

Which are the shortcoming of the discharge gate:

(1) Have relative friction between the but the intersection of sealing surface and easy to damage contacted to two seal damper with valve seat open and close, it is apt to damage, can influence the seal and life time, it is more difficult to maintain.

(2) It open and close by time long, highly it is big because discharge gate must wide-open or full-turn-off, damper journey large, open, use, take certain space, physical dimension high, it installs required spaces to be relatively loud.

(3) The complicated discharge gate of the structure generally has two sealing surfaces, give and process, grind sum to maintain and increase a little, there are more difficult parts, it is relatively difficult to make and maintain, the cost is higher than the stop valve.

Under some some working condition of department ‘ Such as oil pipeline of the petroleum department) ,Do not allow to adopt the contracting valve of the path. On one hand lose for the resistance of reducing the pipeline, cleaning the pipeline for machinery causes the obstacle after on the other hand in order to prevent the path from shrinking.

” Z41W-16P stainless steel bright pole discharge gate – Z45W-16P stainless steel dark pole discharge gate ” Specification:

Make the requirements: DN15 is less than or equal to DN800.

Temperature grade: 0 ¡æ is less than or equal to 550 ¡æ.

Pressure grade: 0.1Mpa is less than or equal to 6.4Mpa (vltrahigh voltage can be made to order) .

The valve body material is chosen: Stainless steel (304, 304L, 316, 6316L)

Z41W-16P stainless steel flanged gate valve Q41F-16P stainless steel ball valve D343W-16P stainless steel butterfly’s valve D373W-16P stainless steel clash butterfly’s valve J41W-16P stainless steel cuts Stop the valve D643W-16P stainless steel pneumatic valve D943W-16P stainless steel electronic valve Z543F-16P stainless steel dull and stereotyped flanged gate valve Y42W-150LB stainless steel pressure reducing valve A41W The stainless steel safe valve ZJHF stainless steel regulates the valve G41H-16P stainless steel diaphragm valve SG41W-16P stainless steel filtering device AS8 stainless steel separating device Z61W-100P and does not become rusty Steel high-pressure valve Z541W-25P stainless steel high-temperature valve WJJ stainless steel injection valve X44W-16P stainless steel stopcock

Z41W-16P stainless steel bright pole discharge gate – dark pole discharge gate characteristic of Z45W-16P stainless steel is as follows:

1,Select suitable materials exquisitely, accord with GB, API, DIN and close the standard, the material is overall and high in quality.

2,Accord with Germany and enter the canonial requirement, it is reliable, of good performance, handsome in appearance to seal.

3,It is rational to seal pair and mate the advanced person, the department that the sealing surfaces of damper and valve seat adopt different hardness sets up(Stellite) very much The carbide build-up welding of the cobalt base was sealed reliably, the hardness was high, wear-resisting, high temperature resistant, was able to bear corroding, resisting and abrading of good performance, longe-lived.

4,Through quench and tempering and surface nitrogen V Visualization, there is good corrosion resistance, resist abrading and wearability in the valve stem.

5,Adopt the wedge plate structure of elastic floodgate, the middle heavy-calibre sets up the thrust bearing, friction is small, and is furnished with striking the hand wheel, it is easy to open and close.

6,Can adopt various and mix pipe flange standard and flange sealing surface form, meeting various projects’ needs and user’s requirement.

” Z41W-16P stainless steel bright pole discharge gate – Z45W-16P stainless steel dark pole discharge gate ” The products material is chosen:

Part name

Valve body / valve cover / damper / valve stem: 0Cr18Ni9, 00Cr18Ni10, 0Cr18Ni9Mo2, 00Cr18Ni10Mo2.

Valve stem nut: ZCuA110Fe3

Packing: PTFE weaves.

Shim: 304+PTFE.

Gland: 0Cr18Ni9, 00Cr18Ni10, 0Cr18Ni9Mo2, 00Cr18Ni10Mo2.

” Z41W-16P stainless steel bright pole discharge gate – Z45W-16P stainless steel dark pole discharge gate ” Structural features:

1.Unless it design and make products according to API standard, reliable without being sealed,it is of good performance, can and import equipment corollary use.

Above 2.600Lb damper sealed and adopted the department and set up the carbide build-up welding of the cobalt base with the valve seat very much, wear-resisting, high temperature resistant, able to bear corrosion, it is of good performance and having long performance life to resist and abrade

3.Through quench and tempering and surface nitrogen V Visualization, there is good corrosion resistance and resist the abrading in the valve stem.

4.Adopt the wedge plate structure of elastic floodgate, the middle heavy-calibre sets up the antifriction bearing, open and close it easily.

5.Valve body material variety is complete, the packing, the shim, according to actual working conditions or rational apolegamies of user’s requirement, can be suitable for various pressures, temperatures and medium working conditions.

The lumen adopts the self-fastening containment structure of the pressure in 6.1500LB, 2500LB. The sealing property rises and raises with the internal pressure, reliability is high.

7.Sealed and adopted the stainless steel whorl joint seat seat or body build-up welding austenitic stainless steel, it is reliable to seal, the packing is changed and maintained and can go on under the not incessant situation, not convenient and swift the influence system run.



Contacts: Manager Zheng
Telephone: 8613916671098
Fax: 86
Email: shrkfm@163.com
Web site: http://www.zhe-fm.com
Address: Little harbour industry Road, Lane 158 No. 2 of town of Kunshan of Songjiang district of Shanghai

Tags: ,

Sunday, November 26th, 2017 Power & control products No Comments