High-temperature high-pressure welding neck discharge gate – Model Z61H-160 Z61H-160

Valve Ke, Confucianism of Shanghai, high-temperature high-pressure welding neck to use for, block or put through the medium in the pipe line in high-pressure pipe line in discharge gate – Z61H-160 type, choose different materials, can be suitable for many kinds of mediums such as water, steam, oil, acid medium, oxidative medium, urea respectively. Used mainly in the pressure in Class600- 2500LB, operating temperature – 29- 425 ¡æ(carbon steel) Or – 29- 500 ¡æ(stainless steel) ,Use on high-temperature high-pressure pipe lines of industry such as the hydropower station, chemical industry, petroleum,etc..

[High-temperature high-pressure welding neck discharge gate - Z61H-160 type ] employs the norm:

1,Design and manufacture: E101

2,Structure length: E101

3,Welding neck is connected: 78DG  ANSI  B16. 25

4,Check sum is tested: E101 Item Model:

Use:

| | =High-temperature high-pressure female screw thread discharge gate =| | Applicable in Class 150 – 2500 , operating temperature -29- 425 ¡æ(carbon steel) Or – 29- 500 ¡æ(stainless steel) Pipe lines small-bore at,last medium at pipe line, be chosen by different materialed, can be suitable for many kinds of mediums such as water, steam, oil, nitric acid, acetic acid, oxidative medium, urea separately. Confucianism Ke valve brand employ more at the petroleum pipeline.

Carry out the standard ]

Design and manufacture: JB/T 7746

The end size of the whorl: GB 7306

Structure length: JB/T 7746

The pressure is the temperature: GB/T 9131

Test and test: JB/T 9092

[High-temperature high-pressure welding neck discharge gate - Z61H-160 type ] performance parameter of main frame:

1.Use and transmit: Manually, worm gear, it is pneumatic /electronically (be be brought manualed)

2.Connect: Female screw thread, external thread, flange, welding

3.The structure of the valve body: Single valve plate, one pair of valve plates.

4.The valve body is sealed: Soft to seal, hard and seal.

5.Service pressure: 0.6Mpa is less than or equal to 42Mpa

6.Make the requirements: DN15 is less than or equal to DN250

7.Applicable temperature: 0 ¡æ is less than or equal to 550 ¡æ

8.The main material of valve body: Stainless steel, cast steel, carbon steel, casting iron,etc..

9.Applicable working condition medium: Water, oil, steam,etc..

Z41H-320 forged steel flanged gate valve Q347H-320 forges the valve J61Y-320 forged steel of steel ball and closes at the valve Q641F-320 pneumatic forged steel valve Q941F-320 electronic forged steel valve Z43H-320 The forged steel dull and stereotyped discharge gate Y42H1500LB forged steel pressure reducing valve A47Y-320 forged steel safe valve ZJHF forged steel regulates the valve SG61H-320 forged steel filtering device Q347F-2500LB high Press forged steel valve Q347H-2500LB high-temperature forged steel valve JJ61Y-160 forged steel needle valve

The high-temperature high-pressure welding neck discharge gate – order notice of Model Z61H-160:

Please mark out when, order: Such as 1. The name of product, 2. Nominal size, 3. Service pressure, 4. Use the temperature 5. Use mediums, 6. Valve body material, 7. Address of delivering.

Second, if like the type that is selected by the design unit, please place an order with sales department of our company directly according to the type.

Third, it is explained that please come to electricity while ordering the products if there are special requirements

Fourth, the above is unidentified please send a telegram here or send the fax to consult, Confucianism of Shanghai the Ke ‘s welcomes your incoming telegram! Thanks!

The structural pattern is as follows:

1.The whole path or swedging

2.The structure length presses ANSI/ASME B16.10

3.The flange presses ANSI/ASME B16.5

4.Valve cover of self sealing

5.The bright pole takes the support

6.The self adjusting packing of both ends is pressed set;

7.Sealing falls in the body

8.Whole valve body Fran

9.The end of welding neck presses ANSI/ASME B16.25

10.The ring connects the valve cover shim of the valve body

11.With the bolt type valve covers, the whorl is sealed, welding valve covers of the winding type shim, or self sealing valve cover

High-temperature high-pressure welding neck discharge gate – Z61H-160 -type characteristic

Forged steel female screw thread discharge gate ( Steel female screw thread wedge discharge gate) Fluid resistance is small, open, close the required force moment minorly, can use on the ring network pipe line that the medium flows in two directions, just say the medium flows into unrestrictedly. When being wide-open, the erosion that the sealing surface receives the job medium is smaller than the stop valve. Physique is simple in architectural comparison, it is better to make manufacturability, the structure length is shorter.

Three kinds of valve covers design the form. The first kind is a bolt type valve cover, according to the valve that this kind of design form is designed, its valve body and valve cover are connected with the bolt nut, the winding type shim (316 inserts the soft graphite to make) Seal. The customer can also adopt the ferrule to connect while having special requirements. The second kind of design form is a valve cover of welded types, press the formal valve of this kind of design, the valve its valve body and valve cover use the screw joint, weld and seal completely. The customer can also be adopted completely and welded and connected while having special requirements. The third kind is a valve cover of self sealing, according to the valve that this kind of design form is designed, its valve body and valve cover use the screw joint, the dense ring of since the internal pressure is sealed.

High-temperature high-pressure welding neck discharge gate – Z61H-160 type makes the standard

Design specification: JB/T 7746, API602

Structure length: JB/T 7746, factory norm

Bear the socket / whorl: JB/T1751/GB7306, ANSI B16.11/B2.1

Test and examine: JB/T 9092, API598

Pressure – temperature: GB/T 9131, ANSI B16.34

Product identification: GB/T 12220, MSS SP25

Stock norm: JB/T 7928 GB API



Contacts: Manager Zheng
Telephone: 8613916671098
Fax: 86
Email: shrkfm@163.com
Web site: http://www.zhe-fm.com
Address: Little harbour industry Road, Lane 158 No. 2 of town of Kunshan of Songjiang district of Shanghai

Sunday, November 26th, 2017 Power & control products

TAGS: ,

No comments yet.

Leave a comment